Index index by Group index by Distribution index by Vendor index by creation date index by Name Mirrors Help Search

fwupd-1.2.11-lp152.3.3.1 RPM for aarch64

From OpenSuSE Ports Leap 15.2 updates for aarch64

Name: fwupd Distribution: openSUSE Leap 15.2
Version: 1.2.11 Vendor: openSUSE
Release: lp152.3.3.1 Build date: Thu Aug 20 17:30:02 2020
Group: System/Management Build host: armbuild24
Size: 7227414 Source RPM: fwupd-1.2.11-lp152.3.3.1.src.rpm
Summary: Device firmware updater daemon
fwupd is a daemon to allows session software to update device firmware on
the local machine.

You can either use a GUI software manager like GNOME Software to view and apply
updates, the command line tool or the system D-Bus interface directly.




GPL-2.0-or-later AND LGPL-2.1-or-later


* Tue Jun 09 2020 Michael Gorse <>
  - Add CVE-2020-10759.patch: check for a valid gpg signature
    (boo#1172643 CVE-2020-10759).
* Thu Nov 21 2019 Frederic Crozat <>
  - Ensure /var/cache/fwupd is created and owned by package,
    required when StateDirectory is not set for systemd service.
* Thu Nov 14 2019
  - Update to version 1.2.11 (jsc#SLE-10751):
    * synapticsmst: Use a more suitable icon for the device
    * thunderbolt: Fix logic to work properly with ICL thunderbolt
    * Do not ask the user to upload a report if ReportURI is not set
    * Do not crash when starting tpm2-abrmd
    * fu-history: Update device_modified in sql database during
    * synaptics-prometheus: Fix tiny memory leak when using
    * Remove replug flag after the device comes back from reboot
    * uefi: add support for tpm2-tools 4.X
    * fu-engine/fu-config: Reload metadata store when configuration
    * unifying: update Solaar url
    * synapticsmst: Add a SynapticsMSTBoardID for another Lenovo dock
    * synapticsmst: Add a SynapticsMSTBoardID for a Lenovo dock
    * synapticsmst: Display the board ID in non-hex form in the error
    * Be more accepting when trying to recover a failed database
    * modem-manager: add counterpart GUID for the DW5821e
    * fu-tool: Port ability to update a single device from fwupdmgr
    * uefi: Actually write the new device path if different than
    * Fix a crash when stopping the fwupd service
    * Relax the certificate time checks in the self tests for the
      legacy certificate
    * Never show AppStream markup on the console
    * Do not segfault when trying to quit the downgrade selection
    * Allow specifying <firmware>GUID</firmware> to check any version
  - Add fwupd-bsc1130056-change-shim-path.patch to set the default
    shim binary for openSUSE/SLE (bsc#1130056)
  - Add fwupd-bsc1143905-hash-the-source-files.patch to hash the
    source files instead of libfwupdprivate.a to avoid the checksum
    change due to the random naming LTO profile sections
  - Mark fwupdate as obsolete
    + fwupdate has been merged into fwupd since fwupd 1.1.0.
* Fri Sep 21 2018
  - Update to version 1.0.9 (FATE#326702):
    + New Features:
    - Add support for more Wacom tablets.
    - Add support for the Synaptics Panamera chip.
    - Add validation for Titan Ridge Thunderbolt devices.
    - Use boltd force power API if available.
    + Bugfixes:
    - Allow flashing Unifying devices in recovery mode.
    - Allow updating just one specific device from the commandline.
    - Do not hold hidraw devices open forever.
    - Do not use 8bitdo bootloader commands after a successful
    - Don't crash when the Dell alternate device has not been set.
    - Don't potentially expose user passwords for remotes.
    - Fix a potential buffer overflow when applying a DFU patch.
    - Fix a potential segfault in smbios data processing.
    - Fix downgrading older releases to devices.
    - Fix failure to detach Unifying devices when using a slow host
    - Fix flashing devices that require a manual replug.
    - Handle -EAGAIN from the kernel better when reading NVM.
  - Drop enable_pkcs7_when_testing_only.patch: fixed upstream.
* Mon Sep 10 2018 Jan Engelhardt <>
  - Use noun phrase for summary. Trim request for comments from
* Wed Jul 25 2018
  - Run %udev_rules_update in post as package install udev rules
* Wed Jul 11 2018
  - Update to version 1.0.8:
    + New Features (including version 1.0.7):
    - Add an plugin to update some future Wacom tablets
    - Add 'fwupdmgr get-topology' to show logical device tree
    - Add support for creating a flatpak
    - Add support for creating a snap
    - Add support for Motorola S-record files
    - Add the Linux Foundation public GPG keys for firmware and metadata
    - Show a translated warning when the server is limiting downloads
    - Add enable-remote and disable-remote commands to fwupdmgr
    - Add fu_plugin_add_compile_version() for libraries to use
    - Allow requiring specific versions of libraries for firmware updates
    - If no remotes are enabled try to enable the LVFS
    - Show a warning with interactive prompt when enabling a remote
    + Bugfixes (including version 1.0.7):
    - Add a firmware diagnostic tool called fwupdtool
    - Adjust all licensing to LGPL 2.1+
    - Allow installing more than one firmware using 'fwupdmgr install'
    - Allow specifying hwids with OR relationships
    - Do not call fu_plugin_init() on blacklisted plugins
    - Do not require libcolorhug to build
    - Fix a crash in libfwupd where no device ID is set
    - Fix a potential DoS in libdfu by limiting holes to 1MiB
    - Fix a segfault that sometimes occurs during cleanup of USB plugins
    - Fix Hardware-ID{0,1,2,12} compatibility with Microsoft
    - Hide devices that aren't updatable by default in fwupdmgr
    - Search all UEFI GUIDs when matching hardware
    - Stop matching Nintendo Switch Pro in the 8bitdo plugin
    - Check that EFI system partition is mounted before update
    - Disable synapticsmst remote control on failure
    - Don't recoldplug thunderbolt to fix a flashing failure
    - Fix SQL error when running 'fwupdmgr clear-offline'
    - Improve the update report message
    - Only enumerate Dell Docks if the type is known
    - Only run certtool if a new enough gnutls is present
    - Prevent a client crash if the daemon somehow sends invalid data
    - Reboot after scheduling using logind not systemd
    - Use the right encoding for the label in make-images
  - Added/backported enable_pkcs7_when_testing_only.patch:
    + needed to disable pkcs7 test during build (can be removed for
      fwupd >= 1.0.9)
* Wed Apr 04 2018
  - Update hasbang in installed files from /usr/bin/env python3 to
* Tue Apr 03 2018
  - Update url
  - Small packaging cleanup with spec-cleaner
* Fri Mar 23 2018
  - Update to version 1.0.6:
    + New Features:
    - Add bash completion for fwupdmgr.
    - Add support for newest Thunderbolt chips.
    - Allow all functions that take device arguments to be
    - Allow devices to use the runtime version when in bootloader
    - Allow overriding ESP mount point via conf file.
    - Delete any old fwupdate capsules and efivars when launching
    - Generate Vala bindings.
    + Bugfixes:
    - Allow ctrl-d out of the prompt for devices.
    - Allow to create package out of provided binary.
    - Correct handling of unknown Thunderbolt devices.
    - Correctly detect new remotes that are manually copied.
    - Fix a crash related to when passing device to downgrade in
    - Fix running the self tests when no fwupd is installed.
    - Fix Unifying signature writing and parsing for Texas
    - Only send success and failure reports to the server.
    - Use a CNAME to redirect to the correct CDN for metadata.
    - Use a longer timeout when powering back the Thunderbolt
  - Add pkgconfig(bash-completion) BuildRequires: new dependency.
* Thu Mar 15 2018
  - Ensure library package has a dependency on main package,
    otherwise it won't be usable.
* Mon Mar 05 2018
  - Update to version 1.0.5:
    + New Features:
    - Offer to reboot when processing an offline update.
    - Report the efivar, libsmbios and fwupdate library versions.
    - Report Thunderbolt safe mode and SecureBoot status.
    - Show the user a URL when they report a known problem.
    - Support split cabinet archives as produced by Windows Update.
    + Bugfixes:
    - Be more careful deleting and modifying device history.
    - Clarify which devices don't have upgrades.
    - Ensure the Thunderbolt version is xx.yy.
    - Fix a daemon warning when using fwupdmgr get-results.
    - Fix crasher with MST flashing.
    - Fix DFU detach with newer releases of libusb.
    - Include the device VID and PID when generating the device-id.
    - Set the RemoteId when using GetDetails.
    - Stop matching 8bitdo DS4 controller VID/PID.
    - Use help2man for dfu-tool and drop docbook dependencies.
    - Use ngettext for any strings with plurals.
    - Use the default value if ArchiveSizeMax is unspecified.
* Mon Mar 05 2018
  - Update to version 1.0.4:
    + New Features:
    - Add D-Bus methods to get and modify the history information.
    - Allow the user to share firmware update success or failure.
    - Ask the user to refresh metadata when it is very old.
    - Store firmware update success and failure to a local
    + Bugfixes:
    - Add a device name for locked UEFI devices.
    - Allow each plugin to opt-in to the recoldplug action.
    - Fix firmware downloading using gnome-software.
    - Fix UX capsule reference to the one specified in efivar.
    - Never add two devices to the daemon with the same ID.
    - Rescan supported flags when refreshing metadata.
  - Add pkgconfig(json-glib-1.0) BuildRequires: new dependency.
* Mon Mar 05 2018
  - Update to version 1.0.3:
    + New Features:
    - Add a new plugin to add support for CSR "Driverless DFU".
    - Add initial SF30/SN30 Pro support.
    - Support AppStream metadata with relative <location> URLs.
    + Bugfixes:
    - Add more metadata to the user-agent string.
    - Block owned Dell TPM updates.
    - Choose the correct component from provides matches using
    - Do not try to parse huge compressed archive files.
    - Fix a double-free bug in the Udev code.
    - Handle Thunderbolt "native" mode.
    - Use the new functionality in libgcab >= 1.0 to avoid writing
      temp files.
* Thu Dec 21 2017
  - Unbreak compilation on non-x86, upstream renamed options to disable
* Tue Dec 19 2017
  - Update to version 1.0.2:
    + Add a plugin for the Nitrokey Storage device
    + Add support for the original AVR DFU protocol
    + Allow different plugins to claim the same device
    + Allow quirks to set common USB properties
    + Move a common plugin functionality out to a new shared object
    + Optionally delay the device removal for better replugging
    + Set environment variables to allow easy per-plugin debugging
    + Use a SHA1 hash for the internal DeviceID
    + Add quirk for AT32UC3B1256 as used in the RubberDucky
    + Disable the dell plugin if libsmbios fails
    + Don't register for USB UDev events to later ignore them
    + Fix a possible buffer overflow when debugging ebitdo devices
    + Fix critical warning when more than one remote fails to load
    + Fix DFU attaching AVR32 devices like the XMEGA
    + Ignore useless Thunderbolt device types
    + Refactor ColorHug into a much more modern plugin
    + Release the Steelseries interface if getting the version failed
    + Remove autoconf-isms from the meson configure options
    + Show a nicer error message if the requirement fails
    + Sort the output of GetUpgrades correctly
  - Changes from version 1.0.1:
    + Add support for HWID requirements
    + Add support for programming various AVR32 and XMEGA parts using DFU
    + Add the various DFU quirks for the Jabra Speak devices
    + Allow specifying the output file type for 'dfu-tool read'
    + Move the database of supported devices out into runtime loaded files
    + Support the IHEX record type 0x05
    + Use help2man to generate the man page at build time
    + Use the new quirk infrastructure for version numbers
    + Catch invalid Dell dock component requests
    + Correctly output Intel HEX files with > 16bit offset addresses
    + Do not try to verify the element write if upload is unsupported
    + Fix a double-unref when updating any 8Bitdo device
    + Fix crash when enumerating with Dell dock connected but with no UEFI
    + Fix uploading large firmware files over DFU
    + Format the BCD USB revision numbers correctly
    + Guess the DFU transfer size if it is not specified
    + Include the reset timeout as wValue to fix some DFU bootloaders
    + Make the error message clearer when sans fonts are missing
    + Support devices with truncated DFU interface data
    + Use the correct remote-specified username and passord when using fwupdmgr
    + Use the correct wDetachTimeOut when writing DFU firmware
    + Verify devices with legacy VIDs are actually 8Bitdo controllers
  - Add help2man as BuildRequires.
* Thu Dec 14 2017
  - Fix dependencies and build options for non-x86 architectures. At
    least FW updates for USB are arch independent, and EFI FW updates
    can also be applied on Aarch64.
* Fri Oct 27 2017
  - Update to version 1.0.0:
    * Add the plugin documentation to the main gtk-doc
    * Add a waiting-for-auth daemon state
    * Add fwupd_remote_get_checksum() to use in client programs
    * Generate the LD script from the GObject Introspection data
    * Prevent fwupd from mounting filesystems
    * uefi: Do not use system-specific infomation for PCI devices
    * uefi: Support uploading the firmware splash image
    * dell: only set coldplug delay when we know we need it
    * dell: only run SMI to toggle host MST GPIO on systems with host MST
    * dell: add functionality to blacklist HW with problems
    * dell: only run on intended chassis
    * thunderbolt-power: always run after thunderbolt plugin
    * Allow plugins to depend on each other
    * Add support for SMBIOSv3
    * dell: prefer to use hwids to get DMI keys and DE table
    * debian: remove /etc/fwupd.conf on upgrade
    * unifying: Use fu_plugin_check_supported()
    * Add fu_plugin_check_supported()
    * unifying: Use a device whitelist to avoid breaking devices
    * Fix various printing issues with the progressbar
    * dell: Fix a trivial whitespace issue
    * Do not fail to load the daemon if cached metadata is invalid
    * Do not store the newest release as part of the FuDevice object
    * Add a method to return a list of upgrades for a specific device
    * Move the downgrade calculation to the daemon
    * Make FuDevice derive from FwupdDevice rather than FwupdResult
    * Add a command 'clear-offline' to fwupdmgr
    * Merge releases where multiple remotes provide the same firmware
    * Remove the UniqueID property
    * uefi: Do not set the release version
    * udev: Do not match USB devices, even with a GUID set
    * Use the intel-wmi-thunderbolt kernel module to force power
    * dell: drop thunderbolt force power code
    * unifying: Add hardcoded summaries for peripheral kinds
    * Create
    * Ensure more devices set the device summary
    * Add an 'Summary' property to each device
    * Add a human-readable title for each remote
    * unifying: Disable if the kernel has no CONFIG_HIDRAW support
    * Move deprecated symbols to a new header
    * Introduce an s390x cross compile target to CI
    * Add ModifyRemote as an easy way to enable and disable remotes like the LVFS
    * Do not auto-open all USB devices at startup
    * dfu: Use FuDeviceLocker
    * unifying: Use FuDeviceLocker
    * colorhug: Use FuDeviceLocker
    * ebitdo: Use FuDeviceLocker
    * altos: Use FuDeviceLocker
    * steelseries: Use FuDeviceLocker
    * usb: Use FuDeviceLocker
    * Add FuDeviceLocker to simplify device open/close lifecycles
    * dfu: Remove DEVO support
    * dfu: Remove the now-unused symtab support
    * Remove the ELF support from libdfu and move the code to the altos plugin
    * Use -Werror when building in Travis CI
    * Do not install the libdfu helper library
    * Parse the SMBIOS DMI table directly
    * usb: Disable the fallback USB plugin
    * Test for missing language translations at build time
    * Fix the libdfu self test failure on s390 and ppc64
* Fri Oct 27 2017
  - Update to version 0.9.8:
    * Add a command 'clear-offline' to fwupdmgr
    * Do not fail to load the daemon if cached metadata is invalid
    * Fix a crash when using fu_plugin_device_add_delay()
    * Fix the libdfu self test failure on s390 and ppc64
    * Format the BCD USB revision numbers correctly
    * Never fallback to an offline update from client code
    * Prevent fwupd from mounting filesystems
    * dfu: Allow flashing when the target does not specify an
    * dfu: Do not try to verify the element write if upload is
    * dfu: Fix uploading large firmware files
    * dfu: Include the reset timeout as wValue to fix some hardware
    * dfu: Set the vendor ID to the runtime USB VID
    * dfu: Use 0x0101 as an alias for 0x0110
    * thunderbolt: move test for mock environment
    * udev: Do not match USB devices, even with a GUID set
    * uefi: Do not set the release version
    * unifying: Disable if the kernel has no CONFIG_HIDRAW support
* Tue Sep 19 2017
  - Update to version 0.9.7:
    + 10 months worth of bugfixing, integrating more vendor specific
      Firmware update paths.
* Thu Mar 02 2017
  - Update to version 0.8.1:
    + Delete duplicate translations (gh#hughsie/fwupd#89).
    + Do not hardcode docbook2man path.
    + Fix fwupdmgr timeout with missing pending database.
    + Fix compiler warnings.
    + Fix a crash when enumerating devices on a Dell WLD15.
    + dell: don't initialize libsmbios on unsupported systems.
    + Do not fail to start on Dell hardware.
    + Adjust systemd confinement restrictions.
    + Do not dlclose modules when running under valgrind.
    + Really remove the NoNewPrivileges systemd confinement.
    + Release fwupd 0.8.1.
* Mon Feb 27 2017
  - Update to version 0.8.0:
    + Show a different error when checking for updates while on
    + battery power (gh#hughsie/fwupd#68).
    + Clarify the test in --help and man page related to offline
    + (gh#hughsie/fwupd#69).
    + libdfu: Use a heuristic for the start address if the firmware
    + has no DfuSe footer.
    + dell: Don't return the address of a stack variable.
    + dell: Fix a possibly-impossible-to-hit buffer overrun.
    + close USB devices before error returns (gh#hughsie/fwupd#73).
    + Make libelf support optional.
    + Always make sure we're getting a C99 compiler.
    + Fix redeclaration of polkit autocleanup functions.
    + Uncomment SystemdService parameter in the dbus service file
    + (gh#hughsie/fwupd#74).
    + Make all providers and plugins share a GUsbContext.
    + Unexport libebitdo.
    + Move the plugins into plugin-specific directories.
    + Convert the providers to plugins to simplify code and for
    + future features.
    + Add support for Logitech Unifying devices.
    + Add a set of vfuncs that are run before and after a device
    + update.
    + Return the pending UEFI update when not on AC power.
    + Move the UPower functionality to a plugin.
    + Fix udev plugin loading.
    + fix dfu plugin loading.
    + Disable PrivateNetwork on systemd service.
    + Use more restrictive settings when running under systemd.
    + dell: add a new method for forcing a controller to flash mode.
    + Add VerifyUpdate to update the device checksums server-side.
    + Move the Option ROM parsing to the Udev plugin.
    + Move the device add delay to shared code.
    + Add initial skeleton for Intel Thunderbolt support.
    + unifying: Use the actual bootloader VID/PIDs when in firmware
    + mode.
    + Allow the metadata to match a version of fwupd and the existing
    + fw version.
    + Add fwupd_result_get_device_version_bootloader().
    + Fix the appstream-glib version guards.
    + dell: Add coldplug methods to let other plugins turn on
    + TBT/GPIO.
    + libdfu: Don't read data from some DfuSe targets.
    + Add the ability to run a prepare->exec->cleanup on coldplug.
    + Allow plugins to request that all plugins re-coldplug.
    + thunderbolt: Detecting new devices and add an actual device to
    + the daemon.
    + Add support for flashing the ChaosKey.
    + thunderbolt: add some guards around empty arrays.
    + dell: Adjust the coldplug preparation and cleanup sequence.
    + dell: Fix possible linker problem.
    + Revert "thunderbolt: add some guards around empty arrays".
    + Add fu_plugin_set_coldplug_delay() to allow hardware to
    + initialize if required.
    + altos: Add error checking when using termios.
    + ebitdo: Subclass FuDevice like the altos plugin.
    + altos: Set the flags in the init_real so they work for the
    + cmdline tool.
    + unifying: Subclass FuDevice like the altos plugin.
    + Include all debug messages when run with --verbose.
    + dell: introduce a standalone (noinst) tool to force mode
    + flashes.
    + Introduce plugin for Synaptics MST hubs.
    + synapticsmst: Add cascade support.
    + Only register the D-Bus service when all devices have been
    + added.
    + synapticsmst: Refactor away the global state.
    + synapticsmst: fix cascade support in the plugin.
    + Updates for thunderbolt plugin.
    + thunderbolt: Add special handling for safe mode on Dell systems
    + (gh#hughsie/fwupd#84).
    + synapticsmst: Iterate all nodes rather than hardcoding to 3.
    + synapticsmst: build GUID using dock type.
    + Add a new function fu_dell_supported to fu-dell-common.
    + synapticsmst: add a test suite.
    + synapticsmst: Fix up some trivial whitespace issues.
    + Fix a refcounting issue in the udev plugin.
  - Add rpmlintrc untill security review is resolved
* Mon Jan 30 2017
  - Update to version 0.7.5:
    + Clean up PO files
    + Verify devices support updating in mode they are called.
    + Fix an assert when unlocking the dummy ESRT device
    + Don't create the UEFI dummy device if the unlock will happen on
    + next boot
    + dell: Match on TB16 as well
    + Fix a -fstack-protector-strong crash when uploading firmware
    + Enable the stack protection in local builds
    + dell: If running in test suite, don't try to get product ID
    + from sysfs
    + libfdfu: Show a warning when getting the alt-name failed
    + dfu: Fix listing devices using the ST reference bootloader
    + Show the nicely formatted target name for DfuSe devices
    + libdfu: Fix two possible critical warnings for corrupt USB
    + descriptors
    + libdfu: Correctly offset addresses when one zone has multiple
    + sectors
    + libdfu: Do not do GetStatus on dfuse upload
    + libdfu: Fix uploading from DfuSe devices
    + libdfu: Use the device offset when writing DfuSe firmware
    + libdfu: Add DfuAction enumerated value to represent a device
    + action
    + libdfu: Use an animated progress bar when performing DFU
    + operations
    + libdfu: Do not do a zero-byte download when in DfuSe mode
    + libdfu: Fix verification of written DfuSe firmware
    + libdfu: Ensure the device is open before claiming the interface
    + libdfu: Ensure the mode is set correctly when faking a runtime
    + libdfu: Re-get the quirks when the DfuDevice gets a new
    + GUsbDevice
    + libdfu: Add quirks for HydraBus as it does not have a DFU
    + runtime
    + libdfu: Match the device booloader or runtime VID and PID when
    + checking firmware
    + Add a 'replace-data' command to dfu-tool
    + string
    + libdfu: Add dfu_sector_get_zone() to get the continuous memory
    + zone number
    + libdfu: Wait for DNBUSY to be cleared when checking the DfuSe
    + status
    + libdfu: Correctly erase DfuSe devices
    + Enable hardening flags on more binaries
    + libdfu: Correctly set the element address when uploading from
    + DfuSe devices
  - Add pkgconfig(gmodule-2.0) BuildRequires: Align with what
    + configure checks for.
  - Add pkgconfig(libsmbios_c) BuildRequires: Support dell bios.
    + Unfortunatly, until we have fwup packaged and enabled, this will
    + not work.
  - Add disabled pkgconfig(libtbtfwu): For future thunderbolt
    + support.
* Mon Jan 30 2017
  - Update to version 0.7.4:
    + Add a fallback for older appstream-glib releases
    + Write the ELF files with the correct section type
    + Fix libfwupd self tests when a host-provided fwupd is not
    + available
    + Add dfu_firmware_add_symbol()
    + Add the Altos symbol table to the DfuFirmware
    + Use the symtab to set the VID/PID from Altos IHEX firmware
    + images
    + Show the human-readable version in the 'dfu-tool dump' output
    + Allow specifying the argument to 'dfu-tool set-release' in
    + major.minor format.
    + sections
    + Support writing the IHEX symbol table
    + call
    + Load the symbol table from ELF firmware
    + Load the Altos USB descriptor from ELF files
    + Fix a possible crash when uploading firmware files using libdfu
* Mon Jan 30 2017
  - Update to version 0.7.3:
    + build: Fix gtk-doc build when srcdir != builddir
    + In get-details output, display the blob filename
    + Ensure the update ID is set when getting local firmware details
    + Use a private gnupg key store
    + Add support for installing against multiple devices from a CAB
    + file
    + Use the correct firmware blob when installing a composite
    + device update
    + in get-details output, display update_name rather than Unknown
    + Device
    + statements
    + Don't make failures critical while checking versions or locked
    + state
    + Show a more detailed error when installing firmware on the
    + wildcard
    + Add Dell TPM and TB15/WD15 support via new Dell provider.
    + file
    + Allow blacklisting devices by their GUID
    + header file
    + Add XPS 9250 to Dell TPM modeswitch blacklist
    + Only display flashes left in results output when it gets low.
    + Add a small library for talking with 0bitdo hardware
    + Add another compile warning and fix up any build failures
    + Embed fwupd version in generated libfwupd and libdfu
    + documentation
    + Update fwupdmgr manpage for new commands and arguments
    + build: Fix gtk-doc build when srcdir != builddir
    + online not offline
    + Get the firmware version correctly from 0Bitdo gamepads
    + Switch to the Amazon S3 CDN for firmware metadata
    + Fix writing 8Bitdo device firmware
    + be updated
    + Show the vendor flashing instructions when installing
    + Split out the DFU file formats to separate files
    + Add fwupd_result_remove_device_flag()
    + get-updates output
    + Allow providers to export percentage completion
    + Add fwupd_client_get_status()
    + Handle the 8Bitdo bootloader in a better way
    + Show a progress notification when installing firmware
    + Add fwupd_result_get_unique_id()
    + Use the SHA1 hash of the local file data as the component
    + origin
    + Use the correct define prefix for FwupdDeviceFlags
    + libdfu: Fix hang when parsing corrupt IHEX files
    + Add a set-target-size command to dfu-tool
    + Support the 'DEVO' cipher kind in libdfu
    + Add a set-address command to dfu-util
    + Disable the Dell specific code by default
    + Conditionally enable all providers based upon what's installed
    + Add a summary of providers that are enabled from configure
    + Do not use the deprecated GNOME_COMPILE_WARNINGS
    + Ignore devices that do not add at least one GUID
    + Do not attempt to add DFU devices not in runtime mode
    + Save the unique ID in the pending database
    + libdfu: Add initial ELF reading and writing support
    + Add dfu_firmware_format_from_string()
    + Normalize the DfuFirmwareFormat enums
* Mon Jan 30 2017
  - Update to version 0.7.2:
    + Allow devices to have multiple assigned GUIDs
    + Only return updatable devices from GetDevices()
    + Add fu_device_get_alternate()
    + Allow metainfo files to match only specific revisions of
    + devices
    + Re-read flags for a device after a provider's unlock routine is
    + done
    + Test for a locked device when trying to install firmware update
    + Enforce allowing providers to take away flash abilities
    + Support returning multiple GUIDs from GetDetails
    + Add a GetDetailsLocal() method to eventually replace
    + GetDetails()
    + break
    + libdfu: Add DfuVersion enumerated values
    + libdfu: Show the DFU protocol version in 'dfu-tool list'
    + Only claim the DFU interface when required
* Mon Jan 30 2017
  - Update to version 0.7.1:
    + Fix libdfu CRC check for big endian architectures
    + Add dfu_image_get_element_default()
    + Fix libdfu CRC check for big endian architectures
    + Fix big endian issues when reading and writing DFU and DfuSe
    + files
    + Remove non-interactive pinentry setting from fu-keyring
    + Set the system's DMI product name as the DisplayName for UEFI
    + Re-order output of get-devices to be easier to read
    + Make the device display name nicer
    + update version
    + Return all update descriptions newer than the installed version
    + Add summary and name field for Rival SteelSeries
    + Fix a critical warning when restarting the daemon
    + Add a 'supported' flag to the FuDevice
    + Add fwupd_client_connect()
    + Add a 'monitor' debugging command for fwupdmgr
    + Add device-added, device-removed and device-changed signals
    + Match the AppStream metadata after a device has been adedd
    + Re-match devices when the AppStream metadata is updated
    + Show 'Unknow Device' in fwupdmgr when a device name is not set
    + Set the device description when parsing local firmware files
    + Add support for a new device field "Flashes Left".
    + src/ reshuffle so enableable bits are only
    + referenced when on
    + Add support for a --force flag to override provider warnings
* Mon Jan 30 2017
  - Update to version 0.7.0:
    + Use g_usb_context_wait_for_replug()
    + Run vendor plugins as required
    + Add a plugin for SteelSeries hardware
    + Add fwupd_device_flag_to_string()
    + Return the device flags when getting firmware details
    + Show device flags in 'fwupdmgr get-devices'
    + Add fwupd_trust_flag_to_string()
    + Export FwupdUpdateState in libfwupd
    + Export FwupdUpdateFlags in libfwupd
    + Add FwupdResult to libfwupd
    + Add a self test framework for libfwupd
    + Add FwupdClient to libfwupd
    + Use FwupdClient from libfwupd in fwupdmgr
    + Use libfwupd inside the daemon
    + Emit a FwupdClient::changed when the daemon emits this signal
    + Rename some of the new libfwupd API to align with the D-Bus
    + names
    + libdfu: Fix up some NULL/FALSE confusion
    + libfwup: Fix up some NULL/FALSE confusion
    + FwupdClient
    + Allow other checksum kinds in FwupdResult
    + Allow SHA-256 hashes when verifying
    + Show the checksum kind in the fwupdmgr output
    + Add Alienware to the version quirk table
    + Do not use /tmp for downloaded files
    + Add fwupd_result_has_device_flag()
    + Do not return updates that require AC when on battery
    + Connect to UPower at startup
    + Test that GPG key import actually was successful (or didn't
    + change a key already in the keyring)
    + Use g_auto() in FuKeyring
    + Return errors of the correct type when using libfwupd
    + Allow overridding the location of the pending database for
    + test suite
    + Allow overriding the location of the provider offline files for
    + test suite
    + Validate that the dbus system bus is available before running
    + libfwupd tests
    + Update for changes that have happened in the project
    + Add some basic explanation of how to use fwupd with various
    + frontends
    + Split out the libdfu-devel package
    + Revert "Allow overridding the location of the pending database
    + for test suite"
    + Revert "Allow overriding the location of the provider offline
    + files for test suite"
    + Allow the test suite to run in %check
    + Generate gtk-doc documentation for libfwupd
* Mon Jan 30 2017
  - Update to version 0.6.3:
    + Require AC power before scheduling some types of firmware
    + update
    + Install the hardcoded firmware AppStream file
    + Correct the BCD version number for DFU 1.1
    + Add an unlock method for devices
    + Add ESRT enable method into UEFI provider.
    + Only read PCI OptionROM firmware when devices are manually
    + unlocked
    + Do not use deprecated API from libappstream-glib
    + Ignore the DFU runtime on the DW1820A
    + Export the attribute and quirk values in libdfu
    + Show ignored DFU devices in dfu-util, but not in fwupd
    + Allow defining update vfuncs with no runtime support
    + Revert "Allow defining update vfuncs with no runtime support"
    + Add a simple plugin infrastructure
* Mon Jan 30 2017
  - Update to version 0.6.2:
    + Add 'Created' and 'Modified' properties on managed devices
    + Fix get-results for UEFI provider.
    + Support vendor-specific UEFI version encodings
    + Move quirks directly into a single table and file.
* Mon Jan 30 2017
  - Update to version 0.6.1:
    + Only dump the profiling data when run with --verbose
    + Always persist ColorHug devices after replug
    + Do not misdetect different ColorHug devices
* Thu Dec 10 2015
  - Update to version 0.6.0:
    + Add support for updating USB devices with DFU
    + libdfu: Add support for DfuSe firmware
    + libdfu: Generate gtk-doc documentation
    + libdfu: Don't rely on specific hardware to be present
    + libdfu: Move the VID:PID checks from the tool to DfuDevice
    + libdfu: Use a custom error domain
    + Use the same device identification string format as Microsoft
    + libdfu: Fix crash when setting a target size
    + libdfu: Allow setting the alternate settings in DfuSe firmware
    + libdfu: Add a merge command to dfu-tool
    + libdfu: Allow choosing a different alt-setting when downloading
    + libdfu: Fix a crash when setting a NULL image name
    + libdfu: Correctly implement auto-boot in dfu_device_download()
    + libdfu: Check for extra args to dfu-tool convert
    + libdfu: Call the progress callback when doing detach
    + Ignore the DFU device detach:attach when verifying
    + libdfu: Require a --force flag to flash wildcard firmware
    + Use new API available in fwup 0.5
    + libdfu: Make the element address 32 bits in size
    + libdfu: Support the ST-specific bitCanAccelerate
    + libdfu: Only do a Detach notification if we're actually doing
      to do it
    + libdfu: Use the progress bar for all uploads and downloads
    + libdfu: Improve the output of 'dfu-util list'
    + libdfu: Support download and upload to ST DfuSe devices
    + libdfu: Fix multi-interface devices like the Neo Freerunner
    + libdfu: Add a pkgconfig file
    + libdfu: Use signals to propagate device state
    + libdfu: Add a context object to handle device hotplug
    + libdfu: Add an example showing GObject Introspection
    + libdfu: Do not ref DfuDevice in DfuTarget so the auto-close
    + logic works
    + Close DFU devices as soon as possible after the transfer has
    + Emit the changed signal after doing an update
    + Rescan the DFU device after replug to get the new version
    + libdfu: Add dfu_context_get_device_by_platform_id()
    + libdfu: Add dfu_device_get_runtime_release()
    + libdfu: Add dfu_device_get_display_name()
    + libdfu: Fix self tests after recent API change
    + Split out the DFU provider as a new file
    + libdfu: Copy the platform ID and invalidate the GUsbDevice when
    + libdfu: Accept multiple spaces after the DfuSe sector name
    + libdfu: Verify the GUsbDevice is set before using it
    + libdfu: Remove the weak pointer when destroying the DfuTarget
    + libdfu: Fix dfu_device_wait_for_replug() so it can work with a
    + Export the AppStream ID when returning device results
    + Rescan the DFU device after firmware has been updated
    + libdfu: Handle cancellation with ctrl+c in dfu-tool
    + libdfu: Add a quirk to support DFU runtime-less devices
    + libdfu: Add an explicit 'attach' method
    + libdfu: Add dfu_firmware_get_image_by_name()
    + libdfu: Make reading and writing to targets easier to
    + understand
    + Fix compile with --disable-shared
    + libdfu: Display all the files shown with 'dfu-tool dump'
    + libdfu: Fix a few crashers found using afl
    + libdfu: Fix another bug discovered by the fuzzer
    + libdfu: Add commands to encrypt and decrypt firmware images
    + libdfu: Show better device errors
    + libdfu: Add DfuCipher which is a property on a target and a
    + firmware file
    + libdfu: Add support for the draft 'DFU Metadata Table
    + Specification'
    + libdfu: Only enumerate the DfuContext when required
    + libdfu: Fix several reported crashes in the inhex32 import code
    + Release fwupd 0.6.0
* Thu Dec 10 2015
  - Update to version 0.5.4:
    + Fix compile error against fwupdate git due to dropped
    + functions.
    + Use strerror() when printing errors from libfwupdate
    + Use new API available in fwup 0.5
    + Release fwupd 0.5.4
* Thu Dec 10 2015
  - Update to version 0.5.3:
    + Avoid seeking when reading the file magic during refresh
    + Do not assume that the compressed XML data will be NUL
    + terminated
    + debugging
    + Use the correct user agent string for fwupdmgr
    + Release fwupd 0.5.3
* Thu Dec 10 2015
  - Update to version 0.5.2:
    + Ensure D-Bus remote errors are registered at fwupdmgr startup
    + Show the dotted-decimal representation of the UEFI version
    + number
    + require appstream-glib 0.5.1
    + not found
    + When the version is from the 'FW' extension do not cache the
    + device
    + Support cabinet archives files with more than one firmware
    + Add the update description to the GetDetails results
    + Add profiling data to debug slow startup times
    + Fix verify-update to produce components with the correct
    + provide values
    + Clear the in-memory firmware store only after parsing a valid
    + XML file
    + Release fwupd 0.5.2
* Thu Dec 10 2015
  - Update to version 0.5.1:
    + Fix the error message when no devices can be updated
    + offline update: Use glib api for for reading symlinks
    + Release fwupd 0.5.1
* Thu Dec 10 2015
  - Update to version 0.5.0:
    + Do not merge the existing firmware metadata with the submitted
    + files
    + Raise the dep on GLib to support and use g_autoptr()
    + Do not reboot if racing with the PackageKit offline update
    + mechanism
    + Release fwupd 0.5.0
* Thu Dec 10 2015
  - Update to version 0.1.6:
    + Install fwupd and fwsignd into /usr/lib/$(triplet)/fwupd
    + instead.
    + Use the new secure metadata URI
    + Update the offline update service to invoke right command
    + Don't apply firmware if something else is processing the
    + offline update
    + Remove fwsignd, we have the LVFS now
    + Depend on appstream-glib >= 0.5.0
    + Add application metadata when getting the updates list
    + Simplify the version properties on devices to avoid complexity
    + and bugs
    + Release fwupd 0.1.6
* Thu Dec 10 2015
  - Update to version 0.1.5:
    + Allow fwupd to be autostarted by systemd
    + Sign the test binary with the correct key
    + Do not pre-convert the update description from AppStream XML
    + Devices with option ROM are always internal
    + Prefer the GUID from the firmware than the device
    + Allow no arguments to 'fwupdmgr verify-update' and use sane
    + defaults
    + Add the ability to remove a vendor on the LVFS site
    + Fix validation of written firmware
    + Move the verification and metadata matching phase to the daemon
    + Add a simple config file to store the correct LVFS download URI
    + Make parsing the option ROM runtime optional
    + Add a Raspberry Pi firmware provider
    + Use the AppStream 0.9 firmware specification by default
    + Generate the ColorHug test files at runtime
    + Release fwupd 0.1.5
* Thu Dec 10 2015
  - Update to version 0.1.4:
    + man/ Add --sgml to docbook2man invocation
    + Make statements about storing private keys stronger.
    + Provide a way for clients to add new firmware metadata to the
    + system cache
    + Fix fwupd-offline-update.service
    + Revert "man/ Add --sgml to docbook2man invocation"
    + Add a Udev firmware provider
    + Extract the version string from the ROM in PCI devices
    + Add a 'verify' command that verifies the cryptographic hash of
    + device firmware
    + Make the ROM parsing more robust and add self tests
    + Get the version number out from Intel VBIOS too
    + Provide a way to dump the option ROM using the command line
    + build: gusb is required even without colorhug
    + remove unused variables
    + Do not return NULL as a gboolean
    + Fix Intel VBIOS detection on Dell hardware
    + Do not use the subsystem information when constructing the fake
    + GUID
    + Actually parse the PCI option ROM
    + Accept multiple files at one time when using fwupdmgr dump-rom
    + verify run
    + Add a 'verify-update' command to fwupdmgr
    + Fix trivial bug when parsing firmware versions
    + Keep hitting the hardware until it gives us enough ROM
    + Make the version parsing more resilient to corrupt firmware
    + Fix the example .inf file to reflect reality
    + Fix ROM PPID searching to work for all ROMs
    + Move the LVFS website to the fwupd project
    + Add the ability to create detached signatures
    + Allow cab files to be saved
    + Add a simple signing server that operates on .cab files
    + Automatically download metadata using fwupdmgr if required
    + Don't call efibootmgr after fwupdate.
    + Associate the contact email address directly with the vendor
    + key
    + Use the actual LVFS GPG key
    + Allow running fwsignd as the non-root user
    + metadata
    + Do not merge existing LVFS metadata
    + Do not use the file hash when storing the LVFS submitted
    + firmwares
    + Move GetUpdates to the daemon
    + Change the DBus method for installing firmware to 'Install'
    + Allow installing an offline UEFI update without --offline
    + Add a 'fwupdmgr update' command to update all devices to latest
    + versions
    + 'update' command
    + Increase the size limit of firmware to 50Mb
    + Only sign files when the entire file has been copied
    + Fallback to offline install when calling the update argument.
    + Reload appstream data after refreshing.
    + Release fwupd 0.1.4
* Thu Dec 10 2015
  - Update to version 0.1.3:
    + Coldplug the devices before acquiring the well known name
    + Add an UNKNOWN status so we can return meaningful enum values
    + Run the offline actions using systemd when required
    + Get the firmware version from the device descriptors
    + Added syntax highlighting
    + More markup
    + Support OpenHardware devices using the fwupd vendor extensions
    + Move boolean properties on the device to a set of flags
    + Release fwupd 0.1.3
* Wed May 27 2015
  - Update to version 0.1.2:
    + More markup
    + Fixed typos and markup for executable
    + Add slovak translation
    + Add helper code to validate public key signatures
    + Decompress any firmware signatures in the .cab file
    + Verify firmware if a detached signature is present
    + Show the firmware trust status when doing GetDetails()
    + Only allow signed firmware to be upgraded without a password
    + Add some guidelines for vendors to README
    + Small grammar fix
    + Extract the .cat file alongside the firmware
    + Release fwupd 0.1.2
* Mon Apr 13 2015
  - Update to version fwupd_0_1_1:
    + Do not crash when there are no devices to return
    + Add a 'get-updates' command to fwupdmgr
    + Add and document the offline-update lifecycle
    + Create runtime directories if they do not exist
    + Create a libfwupd shared library
    + Export the status as an enumerated value rather than a string
    + Release fwupd 0.1.1
* Mon Apr 13 2015
  - Initial package.



Generated by rpm2html 1.8.1

Fabrice Bellet, Tue Jul 9 12:50:41 2024