qjackctl-0.9.12-1.1 RPM for s390x

From OpenSuSE Ports Tumbleweed for s390x

JACK Audio Connection Kit - Qt GUI Interface: A simple Qt application
to control the JACK server. Written in C++ around the Qt4 toolkit
for X11, most exclusively using Qt Designer. Provides a simple GUI
dialog for setting several JACK server parameters, which are properly
saved between sessions, and a way control of the status of the audio
server. With time, this primordial interface has become richer by
including a enhanced patchbay and connection control features.

Provides

• qjackctl
• application()
• application(org.rncbc.qjackctl.desktop)
• metainfo()
• metainfo(org.rncbc.qjackctl.metainfo.xml)
• qjackctl(s390-64)

Requires

• libQt6Core.so.6()(64bit)
• libQt6Core.so.6(Qt_6)(64bit)
• libQt6Core.so.6(Qt_6.6)(64bit)
• libQt6DBus.so.6()(64bit)
• libQt6DBus.so.6(Qt_6)(64bit)
• libQt6Gui.so.6()(64bit)
• libQt6Gui.so.6(Qt_6)(64bit)
• libQt6Network.so.6()(64bit)
• libQt6Network.so.6(Qt_6)(64bit)
• libQt6Widgets.so.6()(64bit)
• libQt6Widgets.so.6(Qt_6)(64bit)
• libQt6Xml.so.6()(64bit)
• libQt6Xml.so.6(Qt_6)(64bit)
• libasound.so.2()(64bit)
• libasound.so.2(ALSA_0.9)(64bit)
• libc.so.6()(64bit)
• libc.so.6(GLIBC_2.2)(64bit)
• libc.so.6(GLIBC_2.3.4)(64bit)
• libc.so.6(GLIBC_2.34)(64bit)
• libc.so.6(GLIBC_2.4)(64bit)
• libgcc_s.so.1()(64bit)
• libgcc_s.so.1(GCC_3.0)(64bit)
• libgcc_s.so.1(GCC_3.3.1)(64bit)
• libjack.so.0()(64bit)
• libm.so.6()(64bit)
• libm.so.6(GLIBC_2.2)(64bit)
• libportaudio.so.2()(64bit)
• libstdc++.so.6()(64bit)
• libstdc++.so.6(CXXABI_1.3)(64bit)
• libstdc++.so.6(CXXABI_1.3.9)(64bit)
• libstdc++.so.6(GLIBCXX_3.4)(64bit)
• libstdc++.so.6(GLIBCXX_3.4.32)(64bit)
• rpmlib(CompressedFileNames) <= 3.0.4-1
• rpmlib(FileDigests) <= 4.6.0-1
• rpmlib(PayloadFilesHavePrefix) <= 4.0-1
• rpmlib(PayloadIsZstd) <= 5.4.18-1
• rpmlib(RichDependencies) <= 4.12.0-1

License

GPL-2.0-or-later

Changelog

* Sat Sep 09 2023 ecsos <ecsos@opensuse.org>
  - Update to 0.9.12
    - Setup: disable Settings parameters altogether, except
      frames/period (aka. buffer-size) if running in the so called
      'Active' pure-client mode (eg. under PipeWire's pw-jack
      substitution).
    - Connections: Fixed an old JACK client/ports aliases
      malfunction, hopefully.
    - Graph: Ctrl+left or middle-button click-dragging for panning,
      is now a lot smoother, hopefully.
    - Graph: Click-dragging with the mouse middle-button is now used
      for panning only, not to start a selection anymore.
    - Preppings to next development cycle (Qt >= 6.6)
  - Changes from 0.9.11
    - Graph: Soft incremental bounds constraints now imposed to all
      new and old nodes positioning.
    - Prepping into the next development cycle (with Qt >= 6.5).
  - Switch Tumbleweed to qt6.
* Fri Mar 24 2023 ecsos <ecsos@opensuse.org>
  - Update to 0.9.10
    - Setup: revert to previous settings when dismissing the dialog.
    - Graph: Attempt to make port labels as short as possible.
    - Graph: introducing touch pinch-gesture for zooming.
* Sat Dec 31 2022 ecsos <ecsos@opensuse.org>
  - Update to 0.9.9
    - Graph: whether to draw connectors through or around nodes is a
      new user preference option (cf. View > Connect Through Nodes).
    - Graph: Allow middle mouse button for grabbing and dragging the
      main canvas.
    - Make up visual immediate feedback connectlons.
* Sat Dec 03 2022 Dirk Müller <dmueller@suse.com>
  - update to 0.9.8:
    * Graph: View / Repel Overlapping Nodes option added.
    * Avoid nagging on D-BUS error messsage windows (or bubbles) when
      trying to start in pure JACK client mode (Active).
    * Add current system user-name to the singleton/unique application
      instance identifier.
    * Graph/Connect and Disconnect keyboard shortcuts added to existing
      [Ins] and [Del], as [Ctrl+C] and [Ctrl+D] respectively; also added
      [F2] as brand new keyboard shortcut for Edit/Rename...
* Sun Apr 03 2022 ecsos <ecsos@opensuse.org>
  - Update to 0.9.7
    - Main application icon is now presented in scalable format
      (SVG).
    - Migrated command line parsing to QCommandLineParser/Option
      (Qt >= 5.2)
    - Fixed translations path to be relative to application runtime.
* Mon Jan 10 2022 ecsos <ecsos@opensuse.org>
  - Update to 0.9.6
    - Dropped autotools (autoconf, automake, etc.) build system.
    - Limit or mitigate fast auto-scrolling when moving Graph client
      nodes off the viewport.
    - Whenever possible, adopt the previous named default preset,
      when starting the JACK-server on premises.
    - Conditional fix to MacOSX and FreeBSD builds.
* Thu Oct 07 2021 ecsos <ecsos@opensuse.org>
  - Update to 0.9.5
    - Streamlined Windows and MacOSX deliverables.
    - Korean (ko) translation added.
* Sat Jul 31 2021 Dirk Müller <dmueller@suse.com>
  - update to 0.9.4:
    * All builds default to Qt6 (Qt >= 6.1) where available.
    * CMake is now the official build system.
* Fri May 28 2021 Mark Trompell <mark@marktrompell.de>
  - Add pipewire-libjack-0_3 as an alternative requirement
* Wed May 12 2021 ecsos <ecsos@opensuse.org>
  - Update to 0.9.3
    - Graph connection lines drop-shadow eye-candy has been
      optimized, improving a lot on moving highly-connected nodes,
      especially the ones with plenty of backward-curved connections.
    - All packaging builds switching to CMake.
    - Fixed default preset/aliases switching and reloading when
      entering pure-client mode (ie. "Active" status).
* Mon Mar 15 2021 ecsos <ecsos@opensuse.org>
  - Update to 0.9.2
    - Clock source, Self-connect mode and Server synchronous mode
      options are now always enabled on the Setup / Settings dialog,
      although only available or effective to jackd2.
    - Graph Disconnect now applies to selected connections or nodes
      only.
* Mon Feb 08 2021 ecsos <ecsos@opensuse.org>
  - Update to 0.9.1
    - Graph Disconnect now applies to all selected ports and
      connections.
    - Main window is now freely resizable, while keeping all the
      buttons stretched to the same aspect ratio.
    - Warning to confirm application close is now back in business
      when functioning as client only (Active).
    - Graph items are automatically raised when created or
      high-lighted (incremental z-value).
    - Add a little but straight horizontal line-gap to the Graph
      connections.
    - Customize the Graph zoom slider widget to reset upon mouse
      middle-button click.
    - Add Clear preset button to Setup dialog.
    - Use default values for most preset parameters: sample rate,
      frames/period (aka. buffer-size), periods/buffer,
      realtime priority, port maximum, client timeout, word length,
      wait time, channel maximum.
    - Early preparations for the New Year develop(ment) cycle.
* Thu Jan 14 2021 ecsos <ecsos@opensuse.org>
  - Update to 0.9.0
    - List only available backend drivers when JACK D-BUS is enabled.
    - Graph client-name / node-title aliases persistence have been
      hopefully fixed.
    - Get rid of those "JACK has crashed" red-herrings from latest
      Windows(tm) builds.
    - Early fixing to build for Qt >= 6.0.0 and comply with C++17
      standard.
* Sun Aug 16 2020 Dirk Mueller <dmueller@suse.com>
  - update to 0.6.3:
    Clock source and Self connect restriction options
    have been added to Setup / Settings / Advanced
    - Added preliminary support for JACK CV signal-type
    ports and JACK OSC event-type ports (Graph only).
    - Left-clicking on the system-tray icon now simply
    toggles the main widget visibility, disregarding
    if already hidden undercover to other windows.
    - Graph nodes and ports are now presented with some
    gradient background.
    - Fixed Setup dialog Cancel (or close) behavior when
    Settings > Parameters > Frames/Period (aka. buffer-
    size) it's the only setting that's changed.
    - Early fixing to build for Qt >= 5.15.0.
    - A scalable (.svg) icon version has been added.
    - Make man page compression reproducible (after request
    by Jelle van der Waa, while on the Vee-Ones, thanks).
    - Ditching deprecated QTime methods for QElapsedTimer's
    (in compliance to Qt >= 5.14.0).
    - Custom color (palette) theme editor introduced; color
    (palette) theme changes are now effective immediately,
    except on default.
    - Second attempt to fix the yet non-official though
    CMake build configuration.
    - When using autotools and ./configure --with-qt=...,
    it is also necessary to adjust the PKG_CONFIG_PATH
    environment variable (after a merge request by plcl
    aka. Pedro López-Cabanillas, while on qmidinet,
    thanks).
    - Graph: avoid self-connecting over their own ports
    when client nodes are selected as a whole group;
    also try to match port-types in a oderly fashion
    when connecting multiple selected ports.
    - Fix HiDPI display screen effective support (Qt >= 5.6).
    - Command line arguments (--start, --preset=[label] and
    - -active-patchbay=[path]) are passed and take effect
    on the current singleton/unique application instance,
    when enabled and already running.

Files

/usr/bin/qjackctl
/usr/share/applications/org.rncbc.qjackctl.desktop
/usr/share/doc/packages/qjackctl
/usr/share/doc/packages/qjackctl/ChangeLog
/usr/share/doc/packages/qjackctl/README
/usr/share/doc/packages/qjackctl/TRANSLATORS
/usr/share/icons/hicolor
/usr/share/icons/hicolor/32x32
/usr/share/icons/hicolor/32x32/apps
/usr/share/icons/hicolor/32x32/apps/org.rncbc.qjackctl.png
/usr/share/icons/hicolor/scalable/apps
/usr/share/icons/hicolor/scalable/apps/org.rncbc.qjackctl.svg
/usr/share/licenses/qjackctl
/usr/share/licenses/qjackctl/LICENSE
/usr/share/man/man1/qjackctl.1.gz
/usr/share/metainfo
/usr/share/metainfo/org.rncbc.qjackctl.metainfo.xml

Generated by rpm2html 1.8.1

Fabrice Bellet, Sat Mar 9 12:50:11 2024