| Index | index by Group | index by Distribution | index by Vendor | index by creation date | index by Name | Mirrors | Help | Search |
| Name: mpg123 | Distribution: openSUSE:Factory:zSystems |
| Version: 1.32.3 | Vendor: openSUSE |
| Release: 1.1 | Build date: Tue Oct 17 08:49:57 2023 |
| Group: Unspecified | Build host: s390zl25 |
| Size: 461672 | Source RPM: mpg123-1.32.3-1.1.src.rpm |
| Packager: https://bugs.opensuse.org | |
| Url: http://www.mpg123.de/ | |
| Summary: Console MPEG audio player and decoder library | |
The mpg123 distribution contains an MPEG 1.0/2.0/2.5 audio player/decoder for layers 1, 2 and 3 (most commonly MPEG 1.0 Layer 3 aka MP3), as well as re-usable decoding and output libraries.
LGPL-2.1-only
* Mon Oct 02 2023 Luigi Baldoni <aloisio@gmx.com>
- Update to version 1.32.3
* libmpg123, libsyn123: always ifdef LFS_LARGEFILE_64 (not
just if)
* libsyn123: re-introduce _32 wrappers in addition to
suffix-less ones (regression from 1.31, bug 363)
* Thu Sep 28 2023 Luigi Baldoni <aloisio@gmx.com>
- Update to version 1.32.2
* libmpg123: Re-introduce _64 symbols on native 64 bit offset
platforms. This was a regression since 1.31 series. Sorry,
too much cleanup, not enough testing.
* build:
+ Better O_LARGEFILE logic, avoiding redefintion.
* ports/cmake:
+ Require C99 (bug 360, among other points, thanks to Ozkan
Sezer).
+ Fix broken O_LARGEFILE logic (bug 360).
+ Typo fix and cleanup, also manual SSE switch for Android
on old x86 (bug 359).
* Sun Sep 24 2023 Luigi Baldoni <aloisio@gmx.com>
- Update to version 1.32.1
* Include man pages again in tarball and install. We cannot
avoid the empty man directory when disabling programs with
autoconf.
* Fix signal handler prototype, avoiding some justified warnings.
* ports/cmake:
+ Include CheckTypeSize, which seems to be needed sometimes
+ Avoid O_LARGEFILE redefinition, logic closer to autoconf.
* Sun Sep 24 2023 Luigi Baldoni <aloisio@gmx.com>
- Update to version 1.32.0
* build
+ Move version handling out of configure.ac to ease other
build systems.
+ Include "fmt123.h" instead of <fmt123.h> in main API
headers to make it more likely the correct one is
included (at least gcc picks the one in the same directory
as the including header first).
+ All headers are build-independent now.
+ Fix build for picky linkers by avoiding definition of
wrap_getcpuflags() where it is not used (spurious linker
error to non-exitent getcpuflags(), bug 353).
+ Handle deprecation of C99 detection macro in autoconf 2.70.
+ No use of AC_SYS_LARGEFILE anymore for explicit handling
and differing choice for the libraries and frontend programs.
+ Added --enable-portable and --disable-largefile to
configure, removing the other largefile-related options.
+ Added --disable-components --enable-libmpg123 to only
build libmpg123 (and likewise --enable-libout123,
- -enable-libout123-modules, --enable-libsyn123) to autoconf
build. CMake build has something similar with BUILD_PROGRAMS
and BUILD_LIBOUT123, which leave only libmpg123 and libsyn123
if disabled).
+ Consistent formatting of ./configure --help with
AS_HELP_STRING().
* mpg123
+ Added --libversion.
+ Added proper A-B looping with terminal control key 'o',
renamed --pauseloop to --presetloop.
+ Really get rid of mpg123_position() usage. (It was all
lies before!)
+ Fix terminal progress info when seeking in stopped mode
(1.31 regression).
+ Patch up interaction of output buffer with generic remote
control, adding non-interruptible drain after P 3, and
dropping buffer on QUIT.
+ Uppercase some generic control replies for consinstency:
SILENCE, PROGRESS, MUTE, UNMUTE
* libmpg123, libout123, libsyn123
+ Bumped API version for version query functions.
+ Replaced nearly all symbol renames with explicit INT123_
prefix declarations (intsym.h close to empty now).
* libout123
+ Add sleep builtin output module (silent, but proper
timing).
* libsyn123
+ Introduced SYN123_PORTABLE_API for an API without off_t
and ssize_t (see NEWS.libsyn123).
* libmpg123
+ Internal I/O using explicit largefile support via off64_t,
lseek64, fallback to plain 32 bit off_t.
+ Added explicit 64 bit API with 64 suffix (mpg123_tell64(),
not mpg123_tell_64()).
This allows full avoidance of ambiguus off_t. The API is
always using 64 bit integers, regardless of internal
implementation.
+ Introduced MPG123_PORTABLE_API for an API subset without
off_t and ssize_t.
+ Made mpg123_seek() and friends ignore offset sign for
SEEK_END (always seeking towards beginning, assuming
negative offset) to make lseek()-conforming usage
possible. Seeking beyond the end never made sense, so no
loss of valid functionality.
* Overall use of INT123_strerror(), trying to use thread-safe
strerror_l() if possible.
* Mon Mar 20 2023 Luigi Baldoni <aloisio@gmx.com>
- Update to version 1.31.3
build:
* Fix --disable-8bit.
* Fix some pedantic compiler warnings, avoid breaking libtool
wrappers.
mpg123:
* Fix verbose position printout for new resampling outside
libmpg123 (where output rate differs from decoding rate).
libsyn123:
* Fix reconfiguration of resampler to avoid double free when
reducing decimator stages to zero.
* Sun Jan 15 2023 Luigi Baldoni <aloisio@gmx.com>
- Update to version 1.31.2
* Fix build --with-network=internal only (configure logic error,
bug 348).
* Tue Nov 01 2022 Luigi Baldoni <aloisio@gmx.com>
- Update to version 1.31.1
* Fix largefile aliases for the case of a largefile-insensitive
build that still does define _FILE_OFFSET_BITS from the
outside (sys/feature_tests.h on Illumos).
* Fri Oct 28 2022 Luigi Baldoni <aloisio@gmx.com>
- Update to version 1.31.0
mpg123:
* The --control / -C switch will make mpg123 abort now if
terminal control cannot be enabled.
* Revert to internal network code for plain HTTP to ensure
continued support for original shoutcast servers that do not
talk proper HTTP. External backends are built at the same
time and can be enforced using --network <backend>.
* Try-witout-port for internal network code is gone. We do not
need to keep each ancient hack for specific hosts.
* Handle redirections independently of the backend behind
net123.
* Set proxy environment variables when --proxy is specified,
for net123 backends to use.
* Continue reading for long commands in generic control,
avoiding unnecessary unfinished command errors.
* Change error message from 'unknown command' to
'unknown command with arguments' to avoid confusion why
'help foo' is unknown, as opposed to 'help'.
* Reduce CPU load while just waiting for terminal input.
* Condense terminal control help output and excessive vertical
whitespace in printouts.
* Fix interaction of pause (looping) with buffer, adding
- -pauseloop to set the loop interval.
* Numeric option arguments are strictly checked now for
conversion errors. This also catches -devbuffer, which was
interpretd as -d 0 before. This also applies to out123.
libout123:
* Add same interruption handling to out123_write() as to
unintr_write(), adding EAGAIN to fix bug 342 for certain
ALSA setups.
* Fix race condition to deadlock on buffer_sync_param() where
parameters after the command byte got read as more commands.
This got triggered easily by using the pause key in terminal
mode with buffer (which was discouraged before because of
buffer flushing). Generally, changing parameters with active
buffer process was dangerous since libout123 entered the
scene.
other:
* some build fixes for compiler pickyness
* Disable largefile renames also for non-sensitive POSIX
systems
* Tue Aug 02 2022 Luigi Baldoni <aloisio@gmx.com>
- Update to version 1.30.2
* Only use EWOULDBLOCK if the macro is defined.
* Wed Jul 13 2022 Luigi Baldoni <aloisio@gmx.com>
- Update to version 1.30.1
mpg123:
* Show stderr of network helpers in -vvv mode.
* Use curl --http0.9, if available, to support shoutcast v1
streams without wget (wget not needing such switch, yet).
* Support file:// URLs for local access as was intended with
the last release.
* Give more helpful error message if neither wget nor curl are
usable, also allow error messages from curl to appear when
not --quiet.
* Update the man page.
* Sun Jun 26 2022 Luigi Baldoni <aloisio@gmx.com>
- Update to version 1.30.0
build:
* Use dummy as default module when no other outputs are
enabled. This also fixes a non-module build with just the
dummy.
* Use CMAKE_CURRENT_SOURCE_DIR in CMake build to help nested
use.
mpg123:
* new network backend using external tools/libraries to also
support HTTPS
* old network backend changed to use h_addr_list[0] instead of
h_addr
* terminal control keys now case-sensitive (fixing smal/big
pitch controls)
* additional terminal control keys for simple equalizer
control (A/a for bass, J/j for mids, N/n for treble, e for
reset, E for printout)
* terminal volume control now in decibel steps and bounded to
+/- 60 dB
* terminal control now also with audio from stdin (bug 338) via
/dev/tty or ctermid()
* re-print tag info on decrease of terminal width for a bit
less mess
* always print an empty line after tag info for cleaner
appearance
* print lyrics also to stderr
* remote control API v10 with "@P 3" as additonal message on
track end
* also added PROGRESS command as opposite of SILENCE
* fix some verbosity, tweak help for --icy-interval
* added --auth-file
* also obscure argument to --auth for others
libout123:
* pulse: initialize more error codes to avoid bogus error
messages
version 1.29.4:
libmpg123:
* Saturate reader file position at off_t limit to satisfy
undefined behaviour checkers.
* Avoid harmless unitialized value in ID3v1 check (filepos,
later being set before actual use).
* Sun Dec 12 2021 Luigi Baldoni <aloisio@gmx.com>
- Update to version 1.29.3
libmpg123:
* Catch more NULL pointer arguments in LFS wrappers
(most prominently: mpg123_feedseek(), bug 328).
mpg123:
* Fix regression that did _not_ enable --remote-err on -s
anymore.
* Fix typos in man page (thanks to Naglis Jonaitis).
* Drop mixed-up value limits on remote control SEQ command. It
is up to you if you want to distort your sound.
* Add note about equalizer frequency bands to man page.
build:
* add BUILD_PROGRAMS option to ports/cmake
* Sat Oct 23 2021 Luigi Baldoni <aloisio@gmx.com>
- Update to version 1.29.2
* libmpg123: Fix non-live-decoder safeguard for
mpg123_framebyframe_decode() (was a no-op in practice).
* Mon Oct 18 2021 Luigi Baldoni <aloisio@gmx.com>
- Update to version 1.29.1
mpg123:
* Keep default output encoding of s16 for raw and file outputs
also with the new resampler. This reverts the unintentional
change in 1.26.0 of switching to f32 for forced output rate
unless the NtoM resampler is selected. In any case, you
should make sure to specify your desired --encoding if you
depend on it.
* Catch error in indexing (mpg123_scan() return value was
ignored before, bug 322).
mpg123-strip:
* Lift the resync limit, as it should be to clean up really
dirty streams.
mpg123-id3dump:
* Also lift resync limit for the same reasons.
libout123:
* Fix reporting of device property flags for buffer
libmpg123:
* More safeguarding against attempts to decode if decoder
setup failed and user ignored the returned error code (bug
322)
* Mon Sep 06 2021 Luigi Baldoni <aloisio@gmx.com>
- Update to version 1.29.0
build:
* added --enable-runtime-tables
libmpg123:
* Float deocder runtime table computation is back as option,
based on suggestion and initial patch by Ethan Halsall for a
smaller download size of the wasm decoder built from
libmpg23. This only trims the size of the binary on disk
(network), for runtime overhead and a bit of uneasyness about
concurrency during table computation, which happens
implicitly on handle initialization, only guarded by an
integer flag. This does _not_ revive mpg123_init().
* The ID3v2 UTF-16 BOM check is now a straight-on loop and not
a recursive function.
* Mon Jul 12 2021 Luigi Baldoni <aloisio@gmx.com>
- Update to version 1.28.2
libout123:
* Complete the fix for bug 314, reopening the device after
format setup failure.
* Fri Jul 09 2021 Luigi Baldoni <aloisio@gmx.com>
- Update to version 1.28.1
build:
* Explain --with-default-audio in configure help better.
* Fix build of arm_fpu (regression of configure reorg).
* Re-introduce AC_PROG_C_C99 macro for autoconf 2.69, it's
only obsolete after that.
* Un-break CMake build for botched move of CheckCPUArch.c.in.
libmpg123:
* Make mpg123.h.in usable again with MPG123_NO_CONFIGURE,
for external uses.
* Use predefined MPG123_API_VERSION in mpg123.h.in for the
same.
* Fix an integer constant definition for the most negative 32
bit number to avoid justified compiler complaints.
libsyn123:
* More support for MPG123_NO_CONFIGURE.
* Optionally use predefined SYN123_API_VERSION in syn123.h.in
for the same.
* Add a cast to silence integer sign warning for offset in
muloffdiv64().
libout123:
* Pulse module advertises wider format support now, not
just s16. This makes mpg123 -e s24 work with it, not just
out123.
* Optionally use predefined OUT123_API_VERSION in out123.h.in
for non-configure use.
* Sat Jun 05 2021 Luigi Baldoni <aloisio@gmx.com>
- Update to version 1.28.0
build:
* Fix up the build to actually build all library objects with
libtool consistently, also ensuring no pointless static
archives for output modules.
* Adapted things to autoconf 2.71, requiring 2.69 now
* Improved configure to be more useful --with-default-audio to
define the search order, fix static build for --with-audio
being a list (just choosing the first one).
* Ensure consistent use of LINK_MPG123_DLL in headers.
build (ports/cmake):
* Hardcode ports/cmake CPU detection for x64 and ARM as
CMAKE_SYSTEM_PROCESSOR is useless crap (bug 298 for real).
* Added JACK output, fixed handling of compat_str there
libsyn123:
* Fix syn123_mix() to actually do intermediate conversion when
input and output encoding are the same but non-float. This
makes out123 --mix work with s16 input and output, which is
not that special!
libmpg123:
* Fix misguided handling of part2_3_length checks in
III_get_scale_factors_1() and III_get_scale_factors_2()
which invalidated decoding of a mono source encoded as
ms+i-stereo (bug 312). This was a regression introduced
with version 1.25.7.
libout123:
* Print basic module loading errors only for last one in list.
This enables use of an output module search list that
anticipates module files not installed with the main package.
* Sat May 08 2021 Luigi Baldoni <aloisio@gmx.com>
- Update to version 1.27.2
* Ensure debug.h is included last where it matters to avoid
conflicts with debug/warning macros in system headers
* Fix some debug/printf integer casts for 32 bit platforms.
* Fri May 07 2021 Luigi Baldoni <aloisio@gmx.com>
- Update to version 1.27.0
libmpg123:
* Running on precomputed tables now, no need to call
mpg123_init() anymore. That and mpg123_exit() are both just
empty shells. You can omit them if you do not care about
earlier libmpg123. You can check for MPG123_API_VERSION >=
46.
* Added API that avoids enums, mapped-to by default unless
MPG123_ENUM_API is defined.
libout123:
* Added API that avoids enums, mapped-to by default unless
MPG123_ENUM_API is defined.
* Added device enumeration for win32, win32_wasapi, alsa,
pulse.
This increments the output module ABI version to 3.
* Changed default output module order to put pulse before alsa
since we now ensure that pulse is not inadvertedly started by
the autospawn feature. This improves the experience on
desktop systems with pulse where the alsa to pulse use
causes glitches.
Note that on a modern Linux desktop (Ubuntu), you will not
escape an instance of pulseaudio being started, with even the
enumeration of the ALSA default device summoning the daemon.
If you _want_ sound daemon autospawn behaviour on other
platforms, you need to trigger it outside of libout123.
* examples: Update for dropped mpg123_init(), more sensible
copyright notes.
out123:
* safer limiting of maximum playback rate
* Added --list-devices.
mpg123:
* Fix --continue output to print track_count+1 as continue
position after hitting the end of playlist. Makes
scripts/conplay go to back to the beginning again (regression
in 1.24.0, bug 250).
* Remote control API version 9 with @I { .. @I } wrapping of
ID3 and playlist display.
* Added --list-devices.
* Fix terminal control logic to better handle cases where
stdin or stderr is not a terminal, also avoid enabling
control if you specify stdin as input file.
* Updated debugging/warning/error message macros to include
the function name.
* Mon Mar 22 2021 Luigi Baldoni <aloisio@gmx.com>
- Update to version 1.26.5
* Add ./configure --enable-xdebug (for the resampler issue).
* Avoid denormals in the resampler by adding an alternating
offset (helps performance without -ffast-math, depending on
platform).
libmpg123:
* Fix ID3v2 APIC parsing when frame length bit is set (bug
306).
* Also handle the group flag (skip the group byte).
* Also fix up frame flag handling for ID3v2.3. Did not crop up
yet, but it was just wrong. Impact was not detecting and
bailing out on compressed or encrypted frames properly.
* Wed Feb 17 2021 Fabian Vogt <fvogt@suse.com>
- Avoid unconditional Supplements
* Thu Dec 24 2020 aloisio@gmx.com
- Update to version 1.26.4
* Clarify seeking documentation regarding samples and PCM
frames.
* Fix cmake build to install fmt123.h.
* Some cmake build fixes, tinyalsa addition by Maarten.
* libmpg123: explicitly handle some irrelevant corner cases in
tabinit
* Fri Jul 17 2020 aloisio@gmx.com
- Update to version 1.26.3
* Fix accurate (--enable-int-quality)
* Sun Jul 05 2020 Luigi Baldoni <aloisio@gmx.com>
- Update to version 1.26.2
* Enable terminal control by default only when both input and
output are connected to a terminal. This avoids messing with
terminal settings when piping stderr to a pager, which takes
over terminal input anyway, while mpg123 still thinks it got
control.
* More CMake build fixes
* Use PROG_LIBS for output modules, to reinstate not
necessarily proper but previous behaviour
* Refine LFS support in libsyn123, avoiding
architecture-dependent syn123.h
* Sat May 30 2020 Luigi Baldoni <aloisio@gmx.com>
- Update to version 1.26.1
* Fix cmake build by actually including the read_api_version
file in the distro.
* Fix big-endian build, stupid omission of a variable
declaration, semicolon.
* Silence a harmless warning for build without realtime
priority.
- Drop fix-ppc64_1.patch and fix-ppc64_2.patch (merged upstream)
* Tue May 26 2020 Luigi Baldoni <aloisio@gmx.com>
- Add fix-ppc64_1.patch and fix-ppc64_2.patch
* Mon May 25 2020 Luigi Baldoni <aloisio@gmx.com>
- Update to version 1.26.0
* Too many changes to list, see NEWS
- Add libsyn123 subpackage
- Drop Group tag
- Spec cleanup
/usr/bin/mpg123 /usr/bin/mpg123-id3dump /usr/bin/mpg123-strip /usr/bin/out123 /usr/lib64/mpg123 /usr/lib64/mpg123/output_alsa.so /usr/lib64/mpg123/output_dummy.so /usr/lib64/mpg123/output_oss.so /usr/share/doc/packages/mpg123 /usr/share/doc/packages/mpg123/NEWS /usr/share/doc/packages/mpg123/README /usr/share/man/man1/mpg123.1.gz /usr/share/man/man1/out123.1.gz
Generated by rpm2html 1.8.1
Fabrice Bellet, Sat Mar 9 12:50:11 2024