dtc-1.7.0-1.1 RPM for s390x

From OpenSuSE Ports Tumbleweed for s390x

PowerPC kernels are moving towards requiring a small Open
Firmware-style device tree as the only means of passing information
from bootloaders/firmware to the kernel. This does not require a full
Open Firmware implementation. DTC (Device Tree Compiler) is a tool to
create a static device tree, which is adequate for most embedded
systems (since their topology will not vary across reboots). DTC is
available via a git tree: git://ozlabs.org/srv/projects/dtc/dtc.git

Provides

• dtc
• dtc(s390-64)

Requires

• /bin/bash
• libc.so.6()(64bit)
• libc.so.6(GLIBC_2.2)(64bit)
• libc.so.6(GLIBC_2.2.3)(64bit)
• libc.so.6(GLIBC_2.3)(64bit)
• libc.so.6(GLIBC_2.3.4)(64bit)
• libc.so.6(GLIBC_2.33)(64bit)
• libc.so.6(GLIBC_2.34)(64bit)
• libc.so.6(GLIBC_2.4)(64bit)
• libc.so.6(GLIBC_2.7)(64bit)
• libfdt.so.1()(64bit)
• libfdt.so.1(LIBFDT_1.2)(64bit)
• libyaml-0.so.2()(64bit)
• rpmlib(CompressedFileNames) <= 3.0.4-1
• rpmlib(FileDigests) <= 4.6.0-1
• rpmlib(PayloadFilesHavePrefix) <= 4.0-1
• rpmlib(PayloadIsZstd) <= 5.4.18-1

License

GPL-2.0-or-later

Changelog

* Tue Apr 25 2023 Guillaume GARDET <guillaume.gardet@opensuse.org>
  - update to 1.7.0:
    * dtc
    * Fix -Oasm output on PA-RISC by avoiding ';' separators
    * Put symbolic label references in -Odts output when possible
    * Add label relative path references
    * Don't incorrectly attempt to create fixups for reference to path
      in overlays
    * Warning rather than hard error if integer expression results are
      truncated due to cell size
    * libfdt
    * Add fdt_get_property_by_offset_w() function
    * pylibfdt
    * Fixed to work with Python 3.10
    * A number of extra methods
    * Fix out of tree build
    * fdtget
    * Add raw bytes output mode
    * General
    * Fixes for mixed-signedness comparison warnings
    * Assorted other warning fixes
    * Assorted updates to checks
    * Assorted bugfixes
    * Fix scripts to work with dash as well as bash
    * Allow static builds
    * Formalize Signed-off-by usage
  - Update dtc.keyring
  - Drop upstream patch:
    * makefile-bison-rule.patch
* Mon Sep 26 2022 Andreas Schwab <schwab@suse.de>
  - makefile-bison-rule.patch: Makefile: fix infinite recursion by dropping
    non-existent `%.output`
* Sat Oct 16 2021 Dirk Müller <dmueller@suse.com>
  - update to 1.6.1:
    * A number of bugfixes
    * Fix many warnings with -Wsign-compare
    * Add compilation with meson (not used by default so far)
    * Yet another revamp of how we handle unaligned accesses
    * Added a number of extra checks for common tree errors
    * Checks for interrupt providers
    * i2c reg properties
    * Tighten checking of gpio properties
    * Reduce dependencies when building libfdt only
    * Allow libfdt.h header to be used from C++ more easily
    * Accept .dtbo extension for overlays
    * Update valid node and property characters to match current devicetree spec
    * Add several checks for root node sanity in fdt_check_full()
    * Somewhat more robust type labelling for the benefit of yaml output
* Wed Apr 21 2021 Matthias Gerstner <matthias.gerstner@suse.com>
  - explicitly pass -pie in CFLAGS, since the build system explicitly passes
    - fPIC, which breaks our gcc-PIE profile. This makes all packaged binaries
    PIE-executables (bsc#1184122).
* Tue Mar 10 2020 Paolo Stivanin <info@paolostivanin.com>
  - Update to 1.6.0 (no changelog)
  - Removed dtc-no-common-conflict.patch
* Tue Jan 14 2020 Dirk Mueller <dmueller@suse.com>
  - add dtc-no-common-conflict.patch (bsc#1160388)
* Sun Dec 08 2019 Martin Liška <mliska@suse.cz>
  - Use %make_build and recpect %optflags.
* Wed Oct 30 2019 Dirk Mueller <dmueller@suse.com>
  - switch to building python3 bindings using setuptools to avoid
    patching
* Wed Oct 30 2019 Guillaume GARDET <guillaume.gardet@opensuse.org>
  - Enable python3 binding in python3-libfdt
* Wed Oct 30 2019 Dirk Mueller <dmueller@suse.com>
  - update to 1.5.1:
    * Numerous assorted bugfixes
    * Add a new fdt_create_with_flags() function, and a
      FDT_CREATE_FLAG_NO_NAME_DEDUP flag which improves speed at the
      cost of tree size by not deduplicating property names in the
      strings section
    * Run tests against shared library, so it will catch the common
      mistake of not adding new symbols to the versioning script
    * Add a number of missing symbols to versioning script
    * Use Python3 by default for pylibfdt
    * New fdt_append_addrrange() function in libfdt
  - remove dtc-license.patch (upstream)

Files

/usr/bin/convert-dtsv0
/usr/bin/dtc
/usr/bin/dtdiff
/usr/bin/fdtdump
/usr/bin/fdtget
/usr/bin/fdtoverlay
/usr/bin/fdtput
/usr/share/doc/packages/dtc
/usr/share/doc/packages/dtc/manual.txt
/usr/share/licenses/dtc
/usr/share/licenses/dtc/README.license

Generated by rpm2html 1.8.1

Fabrice Bellet, Sat Mar 9 12:50:11 2024