| Index | index by Group | index by Distribution | index by Vendor | index by creation date | index by Name | Mirrors | Help | Search |
| Name: python311-paramiko | Distribution: SUSE Linux Enterprise 15 |
| Version: 3.4.0 | Vendor: SUSE LLC <https://www.suse.com/> |
| Release: 150400.13.6.1 | Build date: Fri Dec 22 12:03:11 2023 |
| Group: Unspecified | Build host: h01-ch3a |
| Size: 1702359 | Source RPM: python-paramiko-3.4.0-150400.13.6.1.src.rpm |
| Packager: https://www.suse.com/ | |
| Url: https://www.paramiko.org/ | |
| Summary: SSH2 protocol library | |
This is a library for making SSH2 connections (client or server). Emphasis is on using SSH2 as an alternative to SSL for making secure connections between python scripts. All major ciphers and hash methods are supported. SFTP client and server mode are both supported too.
LGPL-2.1-or-later
* Wed Dec 20 2023 steven.kowalik@suse.com
- Update to 3.4.0: (CVE-2023-48795, bsc#1218168)
* Transport grew a new packetizer_class kwarg for overriding the
packet-handler class used internally.
* Address CVE 2023-48795 (aka the "Terrapin Attack", a vulnerability found
in the SSH protocol re: treatment of packet sequence numbers) as follows:
+ The vulnerability only impacts encrypt-then-MAC digest algorithms in
tandem with CBC ciphers, and ChaCha20-poly1305; of these, Paramiko
currently only implements hmac-sha2-(256|512)-etm in tandem with
AES-CBC.
+ As the fix for the vulnerability requires both ends of the connection
to cooperate, the below changes will only take effect when the remote
end is OpenSSH >= 9.6 (or equivalent, such as Paramiko in server mode,
as of this patch version) and configured to use the new
"strict kex" mode.
+ Paramiko will now raise an SSHException subclass (MessageOrderError)
when protocol messages are received in unexpected order. This includes
situations like receiving MSG_DEBUG or MSG_IGNORE during initial key
exchange, which are no longer allowed during strict mode.
+ Key (re)negotiation -- i.e. MSG_NEWKEYS, whenever it is encountered --
now resets packet sequence numbers. (This should be invisible to users
during normal operation, only causing exceptions if the exploit is
encountered, which will usually result in, again, MessageOrderError.)
+ Sequence number rollover will now raise SSHException if it occurs
during initial key exchange (regardless of strict mode status).
* Tweak ext-info-(c|s) detection during KEXINIT protocol phase; the
original implementation made assumptions based on an OpenSSH
implementation detail.
- Add patch use-64-bit-maxsize-everywhere.patch:
* Use the 64-bit value of sys.maxsize.
* Fri Sep 29 2023 mimi.vx@gmail.com
- refresh remove-icecream-dep.patch
- update to 3.3.1
detailed changelog: https://www.paramiko.org/changelog.html#
* Fri May 12 2023 daniel.garcia@suse.com
- Delete paramiko-pr1665-remove-pytest-relaxed.patch
- Add remove-icecream-dep.patch
- Update to 3.1.0:
* [Feature] #2173: Accept single tabs as field separators (in
addition to single spaces) in
<paramiko.hostkeys.HostKeyEntry.from_line> for parity with
OpenSSH’s KnownHosts parser. Patched by Alex Chavkin.
* [Feature] #2013: (solving #2009, plus others) Add an explicit
channel_timeout keyword argument to
paramiko.client.SSHClient.connect, allowing users to configure the
previously-hardcoded default value of 3600 seconds. Thanks to
@VakarisZ and @ilija-lazoroski for the report and patch, with
credit to Mike Salvatore for patch review.
* [Support] #2178: Apply codespell to the codebase, which found a
lot of very old minor spelling mistakes in docstrings. Also
modernize many instances of *largs vs *args and **kwarg vs
* *kwargs. Patch courtesy of Yaroslav Halchenko, with review from
Brian Skinn.
- 3.0.0:
* [Bug]: A handful of lower-level classes (notably
paramiko.message.Message and paramiko.pkey.PKey) previously
returned bytes objects from their implementation of __str__, even
under Python 3; and there was never any __bytes__ method.
* These issues have been fixed by renaming __str__ to __bytes__ and
relying on Python’s default “stringification returns the output of
__repr__” behavior re: any real attempts to str() such objects.
* [Bug] #2165: Streamline some redundant (and costly) byte
conversion calls in the packetizer and the core SFTP module. This
should lead to some SFTP speedups at the very least. Thanks to
Alex Gaynor for the patch.
* [Bug] #2110: Remove some unnecessary __repr__ calls when handling
bytes-vs-str conversions. This was apparently doing a lot of
unintentional data processing, which adds up in some use cases –
such as SFTP transfers, which may now be significantly faster.
Kudos to Shuhua Zhong for catch & patch.
* [Support]: Drop support for Python versions less than 3.6,
including Python 2. So long and thanks for all the fish!
* [Support]: Remove the now irrelevant paramiko.py3compat module.
* [Support]: paramiko.common.asbytes has been moved to
paramiko.util.asbytes.
* [Support]: PKey.__cmp__ has been removed. Ordering-oriented
comparison of key files is unlikely to have ever made sense (the
old implementation attempted to order by the hashes of the key
material) and so we have not bothered setting up __lt__ and
friends at this time. The class continues to have its original
__eq__ untouched.
* [Support]: The behavior of private key classes’ (ie anything
inheriting from PKey) private key writing methods used to perform
a manual, extra chmod call after writing. This hasn’t been
strictly necessary since the mid 2.x release line (when key
writing started giving the mode argument to os.open), and has now
been removed entirely.
* This should only be observable if you were mocking Paramiko’s
system calls during your own testing, or similar.
* [Support] #732: (also re: #630) SSHConfig used to straight-up
delete the proxycommand key from config lookup results when the
source config said ProxyCommand none. This has been altered to
preserve the key and give it the Python value None, thus making
the Python representation more in line with the source config
file.
* [Support]: paramiko.util.retry_on_signal (and any internal uses of
same, and also any internal retries of EINTR on eg socket
operations) has been removed. As of Python 3.5, per PEP 475, this
functionality (and retrying EINTR generally) is now part of the
standard library.
* Sun Apr 23 2023 mcepl@suse.com
- Move documentation into main package for SLE15
* Fri Apr 21 2023 dmueller@suse.com
- add sle15_python_module_pythons (jsc#PED-68)
* Sun Nov 20 2022 code@bnavigator.de
- Update to 2.12.0
* [Feature] #2125: (also re: #2054) Add a transport_factory kwarg
to SSHClient.connect for advanced users to gain more control
over early Transport setup and manipulation. Thanks to Noah
Pederson for the patch.
- Release 2.11.1
* [Bug]: bug:1637 (via #1599) Raise SSHException explicitly when
blank private key data is loaded, instead of the natural result
of IndexError. This should help more bits of Paramiko or
Paramiko-adjacent codebases to correctly handle this class of
error. Credit: Nicholas Dietz.
* [Bug] #1822: (via, and relating to, far too many other issues
to mention here) Update SSHClient so it explicitly closes its
wrapped socket object upon encountering socket errors at
connection time. This should help somewhat with certain classes
of memory leaks, resource warnings, and/or errors (though we
hasten to remind everyone that Client and Transport have their
own .close() methods for use in non-error situations!). Patch
courtesy of @YoavCohen.
- Rename and refresh:
- paramiko-pr1655-remove-pytest-relaxed.patch
+ paramiko-pr1665-remove-pytest-relaxed.patch
* gh#paramiko/paramiko#1665
* Thu May 26 2022 michael@stroeder.com
- update to 2.11.0
* [Feature] #1951: Add SSH config token expansion (eg %h, %p) when
parsing ProxyJump directives.
* [Support] #2004: (via #2011) Apply unittest skipIf to tests currently
using SHA1 in their critical path, to avoid failures on systems starting
to disable SHA1 outright in their crypto backends (eg RHEL 9).
* [Support] #1838: (via #1870/#2028) Update camelCase method calls
against the threading module to be snake_case; this and related tweaks
should fix some deprecation warnings under Python 3.10.
* [Support] #2038: (via #2039) Recent versions of Cryptography have
deprecated Blowfish algorithm support; in lieu of an easy method for
users to remove it from the list of algorithms Paramiko tries to import
and use, we’ve decided to remove it from our “preferred algorithms” list.
This will both discourage use of a weak algorithm, and avoid warnings.
- update to 2.10.5
* [Bug] #2008: (via #2010) Windows-native SSH agent support as merged in
2.10 could encounter Errno 22 OSError exceptions in some scenarios
(eg server not cleanly closing a relevant named pipe).
This has been worked around and should be less problematic.
* [Bug] #2017: OpenSSH 7.7 and older has a bug preventing it from
understanding how to perform SHA2 signature verification for RSA
certificates (specifically certs - not keys), so when we added SHA2
support it broke all clients using RSA certificates with these servers.
This has been fixed in a manner similar to what OpenSSH’s own client
does: a version check is performed and the algorithm used is downgraded
if needed.
* [Bug] #1933: Align signature verification algorithm with OpenSSH re:
zero-padding signatures which don’t match their nominal size/length. This
shouldn’t affect most users, but will help Paramiko-implemented SSH
servers handle poorly behaved clients such as PuTTY.
* Thu Apr 28 2022 dmueller@suse.com
- update to 2.10.4:
* Servers offering certificate variants of hostkey algorithms (eg
ssh-rsa-cert-v01@openssh.com) could not have their host keys verified by
Paramiko clients, as it only ever considered non-cert key types for that
part of connection handshaking. This has been fixed.
* gq PKey instances’ __eq__ did not have the usual safety guard in place to
ensure they were being compared to another PKey object, causing occasional
spurious BadHostKeyException (among other things). This has been fixed.
* Update camelCase method calls against the threading module to be snake_case;
this and related tweaks should fix some deprecation warnings under Python 3.10.
* Fri Apr 08 2022 pgajdos@suse.com
- do not require python-mock for build
* Fri Mar 18 2022 michael@stroeder.com
- Update to 2.10.3 (bsc#1197279, CVE-2022-24302)
Too many changes to be listed here:
https://www.paramiko.org/changelog.html
* Tue Oct 12 2021 ecsos@opensuse.org
- Update to 2.8.0
- [Feature] #1846: Add a prefetch keyword argument to
SFTPClient.get/SFTPClient.getfo so users who need to skip SFTP
prefetching are able to conditionally turn it off.
- [Bug] #1462: (via #1882) Newer server-side key exchange
algorithms not intended to use SHA1 (diffie-hellman-group14-sha256,
diffie-hellman-group16-sha512) were incorrectly using SHA1 after all,
due to a bug causing them to ignore the hash_algo class attribute.
This has been corrected.
- [Support] #1722: Remove leading whitespace from OpenSSH RSA test
suite static key fixture, to conform better to spec.
- [Support] #1727: Add missing test suite fixtures directory to
MANIFEST.in, reinstating the ability to run Paramiko’s tests from
an sdist tarball.
- [Support]: Update our CI to catch issues with sdist generation,
installation and testing.
- [Support]: Administrivia overhaul, including but not limited to:
- Migrate CI to CircleCI
- Primary dev branch is now main (renamed)
- Many README edits for clarity, modernization etc; including
a bunch more (and consistent) status badges & unification with
main project site index
- PyPI page much more fleshed out (long_description is now filled
in with the README; sidebar links expanded; etc)
- flake8, pytest configs split out of setup.cfg into their own files
- Invoke/invocations (used by maintainers/contributors) upgraded
to modern versions
- Skip python2 to fix build errors for Leap.
- Rebase paramiko-pr1655-remove-pytest-relaxed.patch.
* Mon Dec 07 2020 steven.kowalik@suse.com
- Set environment to utf-8 to allow tests to pass on Python 2. (bsc#1178341)
* Tue Oct 13 2020 code@bnavigator.de
- remove dependency on pytest-relaxed
* paramiko-pr1655-remove-pytest-relaxed.patch
* gh#paramiko/paramiko#1655
* Fri Sep 04 2020 mimi.vx@gmail.com
- update to 2.7.2 (bsc#1166758, bsc#1166758, bsc#1205132)
- drop configs.tar.gz
* Add missing test suite fixtures directory to MANIFEST.in
* Remove leading whitespace from OpenSSH RSA test suite static key fixture,
* Fix incorrect string formatting causing unhelpful error message annotation
when using Kerberos/GSSAPI.
* Fix incorrectly swapped order of p and q numbers when loading
OpenSSH-format RSA private keys.
* Sat Dec 21 2019 mimi.vx@gmail.com
- update to 2.7.1
- add configs.tar.gz with missing test data
* full changelog at http://www.paramiko.org/changelog.html
* Tue Jun 25 2019 mimi.vx@gmail.com
- update to 2.6.0 (bsc#1200603)
- drop relaxed.patch and 1311.patch
* add a new keyword argument to SSHClient.connect <paramiko.client.SSHClient.connect>
and paramiko.transport.Transport -> disabled_algorithms
* Fix Ed25519 key handling so certain key comment lengths don't cause
SSHException("Invalid key")
* Add backwards-compatible support for the gssapi
* Tue Jun 11 2019 mimi.vx@gmail.com
- update to 2.5.0
- dropped 1379.patch
- refreshed patches:
paramiko-test_extend_timeout.patch
relaxed.patch
1311.patch
* Add support for encrypt-then-MAC (ETM) schemes (hmac-sha2-256-etm@openssh.com,
hmac-sha2-512-etm@openssh.com) and two newer Diffie-Hellman group key exchange
algorithms (group14, using SHA256; and group16, using SHA512).
* Add support for Curve25519 key exchange.
* Raise Cryptography dependency requirement to version 2.5
* Add support for the modern (as of Python 3.3) import location of MutableMapping
* Wed Mar 13 2019 tchvatal@suse.com
- Run tests verbosely
- Drop cert_support.tar.gz as it is currently properly in the release
* Thu Feb 14 2019 hpj@urpla.net
- add empty line after %autopatch: build fails up to 42.3 otherwise
* Thu Feb 14 2019 mimi.vx@gmail.com
- drop python-pytest_relaxed dependency
- add patches:
1311.patch - fix warnings
1379.patch - fix support for gssapi
relaxed.patch - remove unnecessary pytest_relaxed dep
- remove patch:
disable-gssapi.patch - supersseded
* Tue Dec 04 2018 mcepl@suse.com
- Remove superfluous devel dependency for noarch package
* Tue Nov 13 2018 mimi.vx@gmail.com
- add disable-gssapi.patch - workaround for boo#1115769
* Fri Oct 05 2018 mimi.vx@gmail.com
- update to 2.4.2 (bsc#1111151, CVE-2018-1000805)
- refresh paramiko-test_extend_timeout.patch
* Fix exploit (CVE pending) in Paramiko's server mode (not client mode)
where hostile clients could trick the server into thinking they were
authenticated without actually submitting valid authentication.
* Modify protocol message handling such that Transport does not respond
to MSG_UNIMPLEMENTED with its own MSG_UNIMPLEMENTED
* Updated SSHConfig.lookup <paramiko.config.SSHConfig.lookup> so it returns
a new, type-casting-friendly dict subclass (~paramiko.config.SSHConfigDict)
in lieu of dict literals.
* Thu Mar 15 2018 ro@suse.de
- add paramiko-test_extend_timeout.patch (bsc#1085529)
extend timeout in testsuite to pass on ppc64le
* Thu Mar 15 2018 tbechtold@suse.com
update to version 2.4.1 (bsc#1085276, CVE-2018-7750):
* changelog: update for #1039 / #1051
* Screen off dev version of Python from test matrix
* ensure ed25519 password is bytes
* Cut 2.0.8
* Cut 2.3.2
* Initial tests proving CVE-2018-7750 / #1175
* Guess something else added this prior to the merge
* Fixes CVE-2018-7750 / #1175
* Uncaught typo in test suite
* Initial tests proving CVE-2018-7750 / #XXX
* Test proving #1039 / efficacy of #1051
* Changelog closes #1175
* Cut 2.1.5
* Allow overriding test client connect kwargs in Transport test suite
* Cut 2.4.1
* Fixes CVE-2018-7750 / #XXX
* Cut 2.2.3
* flake8
* Thu Nov 16 2017 mimi.vx@gmail.com
- update to 2.4.0
+ new pytest based testsuite
* dd a new passphrase kwarg to SSHClient.connect so users may disambiguate
key-decryption passphrases from password-auth passwords.
* Drop Python 2.6 and Python 3.3 support
* Thu Oct 05 2017 mimi.vx@gmail.com
- update to 2.3.1
+ cert_support.tar.gz - missing test certificates for testsuite
* Certificate support broke the no-certificate case for Ed25519 keys
(symptom is an AttributeError about public_blob.) This went uncaught
due to cert autoload behavior (i.e. our test suite never actually ran
the no-cert case, because the cert existed!) Both issues have been fixed.
* Implement basic client-side certificate authentication
(as per the OpenSSH vendor extension.)
* Added pre-authentication banner support for the server interface
(ServerInterface.get_banner plus related support in Transport/AuthHandler.)
* Update Ed25519Key so its constructor offers the same file_obj parameter
as its sibling key classes.
* Add a gss_trust_dns option to Client and Transport to allow explicitly
setting whether or not DNS canonicalization should occur when using GSSAPI.
* Paramiko originally defaulted to zlib compression level 9
(when one connects with compression=True; it defaults to off.) This has been
found to be quite wasteful and tends to cause much longer transfers in most
cases, than is necessar
* Enhance documentation around the new SFTP.posix_rename method
so it’s referenced in the ‘standard’ rename method for increased visibility.
* Modify logic around explicit disconnect messages, and unknown-channel situations,
so that they rely on centralized shutdown code instead of running their own.
This is at worst removing some unnecessary code, and may help with some
situations where Paramiko hangs at the end of a session.
* Display exception type and message when logging auth-rejection messages
(ones reading Auth rejected: unsupported or mangled public key); previously
this error case had a bare except and did not display exactly why the key
failed.
* Ed25519 keys never got proper API documentation support; this has been fixed.
* Update how we use Cryptography‘s signature/verification methods
so we aren’t relying on a deprecated API.
* Thu Oct 05 2017 mimi.vx@gmail.com
- update to 2.2.2:
* SSHClient now requests the type of host key it has (e.g. from known_hosts)
and does not consider a different type to be a “Missing” host key.
This fixes a common case where an ECDSA key is in known_hosts and the server
also has an RSA host key.
* Fix up host-key checking in our GSSAPI support, which was previously
using an incorrect API call
* Fix key exchange (kex) algorithm list for GSSAPI authentication;
reviously, the list used solely out-of-date algorithms, and now contains
newer ones listed preferentially before the old
* Clean up GSSAPI authentication procedures so they do not prevent normal
fallback to other authentication methods on failure.
* Add rekeying support to GSSAPI connections, which was erroneously missing.
* Thu Aug 10 2017 tbechtold@suse.com
- update to 2.2.1:
* Missed a spot
* Update .travis.yml
* Whitespace
* Having this in a mini-toctree made the nav look funny and is also just unintuitive
* Changelog re #471, re #65
* these are bytes
* changelog: update for #990 and #993
* ecdh kex support
* flake8/whitespace
* Trailing comma
* Add test for posix-rename@openssh.com extension for SFTP client
* Changelog re #921
* Add a note about new Python-level deps to changelog re: Ed25519 support
* Add method for "posix-rename@openssh.com" extension for SFTP client.
* Add IOError in posix-rename@openssh.com test for python 2 support.
* this isnt bytes
* Added a auth_timeout to handle situations where SSH server stops responding during auth.
* small cleanups
* More changelog flimflammery
* Added changelog entry
* python 3 compatibility
* Incorrect comparison, should be <=
* DDD re #857
* Improve __hash__ functions
* Hrm that should always have been an h1
* No idea how this got past all the earlier flake8 work...
* comments
* Fixed test to support python 2.6
* Note ecdh-sha2 preferred-kex placement in changelog entry for #951, re #983
* Changelog language tweaks
* Reorder cipher and key preferences to make more sense
* Added a test to check that the auth_timeout argument is passed through and applied.
* Changelog tweak
* Cut 2.2.1
* transport: change order of preferred kex and hmac algorithms
* need bcrypt >= 3.1.3 for kdf() ignore_few_rounds kwarg
* Changelog re #972, re #325, closes #325
* cleanup/simplify auth_timeout tests
* Missed a merge conflict lolol
* flake8
* Changelog re #951
* Perplexed at why flake8 did not report this earlier
* Add Python 3.6 to classifiers
* Add support for posix-rename@openssh.com for the SFTP server side and fix tests accordingly.
* sphinx nitpick fixes
* Fixed encoding/decoding of the public key on the wire
* Added test for authentication timeout from a non-responsive server
* refactor files
* fixed comment + consistency
* Changelog re #857
* Cut 2.2.0
* integration test, with ourselves
* TODO
* That was easy. Closes #857
* Add sanity note to changelog re #869
* Unit tests
* Fixes #325 -- add support for Ed25519 keys
* Happy New Year
* implement __hash__() method for Ed25519Key
* pep8
* Increased auth_timeout to 30 seconds
* py3k
* fixed long line
* Link to the spec
* set a minimum version
* Support decrypting keys
* Failing test proving need for #857
- move demos/ to extra -doc package
* Sun Jun 11 2017 mimi.vx@gmail.com
- update to 2.1.3
* Make util.log_to_file append instead of replace.
* SSHClient and Transport could cause a memory leak if there’s a connection
problem or protocol error, even if Transport.close() is called.
* Prior support for ecdsa-sha2-nistp(384|521) algorithms didn’t fully extend
to covering host keys, preventing connection to hosts which only offer
these key types and no others. This is now fixed.
* Prefer newer ecdsa-sha2-nistp keys over RSA and DSA keys during host key
selection. This improves compatibility with OpenSSH, both in terms of general
behavior, and also re: ability to properly leverage OpenSSH-modified
known_hosts files.
* The RC4/arcfour family of ciphers has been broken since version 2.0; but since
the algorithm is now known to be completely insecure, we are opting
to remove support outright instead of fixing it.
* Move sha1 above the now-arguably-broken md5 in the list of preferred MAC
algorithms, as an incremental security improvement for users whose target
systems offer both.
* Writing encrypted/password-protected private key files was silently broken
since 2.0 due to an incorrect API call
Includes a directly related fix, namely adding the ability to read AES-256-CBC
ciphered private keys (which is now what we tend to write out as it is
Cryptography’s default private key cipher.)
* Allow any type implementing the buffer API to be used with BufferedFile,
Channel, and SFTPFile. This resolves a regression introduced in 1.13
with the Python 3 porting changes, when using types such as memoryview.
* Enhance default cipher preference order such that aes(192|256)-cbc are preferred
over blowfish-cbc.
* SSHClient now requests the type of host key it has (e.g. from known_hosts)
and does not consider a different type to be a “Missing” host key. This fixes
a common case where an ECDSA key is in known_hosts and the server also has
an RSA host key.
* Overhaul the codebase to be PEP-8
* Wed Apr 19 2017 toddrme2178@gmail.com
- Implement single-spec version.
* Fri Mar 17 2017 rjschwei@suse.com
- Fix version setting for cryptography for build
* Thu Mar 16 2017 rjschwei@suse.com
- Add python-pyasn1 as Buildrequires for testing
* Fri Feb 24 2017 mimi.vx@gmail.com
- update to 2.1.2
* Fix a bug in server-mode concerning multiple interactive auth steps
* SSHClient now gives its internal Transport a handle on itself, preventing
garbage collection of the client until the session is closed. Without this,
some code which returns stream or transport objects without the client that
generated them, would result in premature session closure
when the client was GCd
* Avoid test suite exceptions on platforms lacking errno.ETIME
* weak how RSAKey.__str__ behaves so it doesn’t cause TypeError under Python 3.
* Tue Dec 13 2016 mimi.vx@gmail.com
- update to 2.1.1
* A tweak to the original patch implementing gh#398 was not fully applied,
causing calls to ~paramiko.client.SSHClient.invoke_shell to fail with
AttributeError. This has been fixed.
* Fix the implementation of PKey.write_private_key_file (this method is only
publicly defined on subclasses; the fix was in the private real
implementation) so it passes the correct params to open()
* Add an optional timeout parameter to Transport.start_clienti
<paramiko.transport.Transport.start_client> (and feed it the value of the
configured connection timeout when used within SSHClient
<paramiko.client.SSHClient>.)
* Catch AssertionError thrown by Cryptography when attempting to load bad
ECDSA keys, turning it into an SSHException.
* Add a missing .closed attribute (plus ._closed because reasons) to
ProxyCommand <paramiko.proxy.ProxyCommand>
* Make the subprocess import in proxy.py lazy so users on platforms without
it (such as Google App Engine) can import Paramiko successfully
* Fix incorrect docstring/param-list for Transport.auth_gssapi_keyex
<paramiko.transport.Transport.auth_gssapi_keyex> so it matches
the real signature.
* Add an environment dict argument to Client.exec_command
* Fri Oct 07 2016 tbechtold@suse.com
- Fix Requires for python-cryptography
- Add missing Requires for python-pyasn1
* Sun Jul 31 2016 michael@stroeder.com
- update to 2.0.2
* [Bug] #758: Apply type definitions to _winapi module from
jaraco.windows 3.6.1. This should address issues on Windows platforms
that often result in errors like ArgumentError: [...] int too long to
convert. Thanks to @swohlerLL for the report and Jason R. Coombs for the
patch.
* [Bug] #774: Add a _closed private attribute to Channel objects so that
they continue functioning when used as proxy sockets under Python 3 (e.g.
as direct-tcpip gateways for other Paramiko connections.)
* [Bug] #673: (via #681) Fix protocol banner read errors (SSHException)
which would occasionally pop up when using ProxyCommand gatewaying.
Thanks to @Depado for the initial report and Paul Kapp for the fix.
* Sat Jul 23 2016 michael@stroeder.com
- updated homepage URL
- update to 2.0.1:
* [Bug] #537: Fix a bug in BufferedPipe.set_event which could cause
deadlocks/hangs when one uses select.select against Channel objects (or
otherwise calls Channel.fileno after the channel has closed).
* [Bug] #520: (Partial fix) Fix at least one instance of race condition
driven threading hangs at end of the Python interpreter session.
(Includes a docs update as well - always make sure to .close() your
clients!)
* Fri Jul 08 2016 dmueller@suse.com
- fix build
* Mon Jun 06 2016 dmueller@suse.com
- fix source url
* Sun May 08 2016 hpj@urpla.net
- update to 2.0.0:
* Add support for 384- and 512-bit elliptic curve groups in ECDSA
key types (aka ecdsa-sha2-nistp384 / ecdsa-sha2-nistp521).
* Due to an earlier bugfix, less-specific Host blocks' ProxyCommand
values were overriding ProxyCommand none in more-specific Host
blocks. This has been fixed in a backwards compatible manner (i.e.
ProxyCommand none continues to appear as a total lack of any
proxycommand key in parsed config structures).
* Fix a backwards incompatibility issue that cropped up in
SFTPFile.prefetch <~paramiko.sftp_file.prefetch> re: the
erroneously non-optional file_size parameter. Should only affect
users who manually call prefetch.
* Replace PyCrypto with the Python Cryptographic Authority (PyCA)
'Cryptography' library suite. This improves security,
installability, and performance; adds PyPy support; and much more.
* Fix stalled/hung SFTP downloads by cleaning up some threading lock
issues.
* Fix a Python 3 compatibility issue when handling two-factor
authentication.
* Clean up setup.py to always use setuptools, not doing so was a
historical artifact from bygone days.
* Update the module in charge of handling SSH moduli so it's
consistent with OpenSSH behavior re: prime number selection.
* Fix up ~paramiko.ssh_exception.NoValidConnectionsError so it
pickles correctly, and fix a related Python 3 compatibility issue.
* Update to jaraco.windows 3.4.1 to fix some errors related to
ctypes on Windows platforms.
* Annotate some public attributes on ~paramiko.channel.Channel such
as .closed.
* Fix logic bug in the SFTP client's callback-calling functionality;
previously there was a chance the given callback would fire twice
at the end of a transfer.
* Identify & work around a race condition in the test for handshake
timeouts, which was causing frequent test failures for a subset of
contributors as well as Travis-CI (usually, but not always,
limited to Python 3.5).
* Remove whitespace in our setup.py's install_requires as it
triggers occasional bugs in some versions of setuptools.
* Strip trailing/leading whitespace from lines when parsing SSH
config files - this brings things in line with OpenSSH behavior.
* Fix behavior of gssapi-with-mic auth requests so they fail
gracefully (allowing followup via other auth methods) instead of
raising an exception.
* Add missing file-like object methods for ~paramiko.file.BufferedFile
and ~paramiko.sftp_file.SFTPFile.
* Clean up and enhance the README (and rename it to README.rst from
just README).
* Mon Feb 01 2016 toddrme2178@gmail.com
- Add --no-transport to fix a known issue with the tests
https://github.com/paramiko/paramiko/issues/574
Check if still failing on next release.
The tests is currently failing on Python 3.5, but it is not
actually Python 3.5 specific, it is just more likely to be
encountered on Python 3.5
- update to version 1.16.0:
* Streamline use of stat when downloading SFTP files via
SFTPClient.get <paramiko.sftp_client.SFTPClient.get>; this avoids
triggering bugs in some off-spec SFTP servers such as IBM
Sterling. Thanks to @muraleee for the initial report and to Torkil
Gustavsen for the patch.
* Fully enable two-factor authentication (e.g. when a server
requires AuthenticationMethods
pubkey,keyboard-interactive). Thanks to @perryjrandall for the
patch and to @nevins-b and Matt Robenolt for additional support.
* Fix 'exec' requests in server mode to use get_string instead of
get_text to avoid UnicodeDecodeError on non-UTF-8 input. Thanks to
Anselm Kruis for the patch & discussion.
* Fix line number reporting in log output regarding invalid
known_hosts line entries. Thanks to Dylan Thacker-Smith for catch
& patch.
* Update the vendored Windows API addon to a more recent
edition. Also fixes :issue:`193`, :issue:`488`,
:issue:`498`. Thanks to Jason Coombs.
* Thu Feb 26 2015 tbechtold@suse.com
- update to version 1.15.2 (bsc#962291)
* [Bug] #320: Update our win_pageant module to be Python 3 compatible
* [Bug] #429: Server-level debug message logging was overlooked during the
Python 3 compatibility update; Python 3 clients attempting to log SSH
debug packets encountered type errors. This is now fixed
* [Bug] #459: Tighten up agent connection closure behavior to avoid
spurious ResourceWarning display in some situations
* [Bug] #266: Change numbering of Transport channels to start at 0
instead of 1 for better compatibility with OpenSSH & certain server
implementations which break on 1-indexed channels
* [Support] #419: Modernize a bunch of the codebase internals to
leverage decorators. Props to @beckjake for realizing we’re no longer
on Python 2.2 :D
* [Support] #421: Modernize threading calls to user newer API
* [Support] #422: Clean up some unused imports
* [Support] #431: Replace handrolled ssh_config parsing code with
use of the shlex module
* [Bug] #415: Fix ssh_config parsing to correctly interpret ProxyCommand
none as the lack of a proxy command, instead of as a literal command
string of "none"
* [Bug] #428: Fix an issue in BufferedFile (primarily used in the SFTP
modules) concerning incorrect behavior by readlines on files whose
size exceeds the buffer size
* [Bug] #455: Tweak packet size handling to conform better to the
OpenSSH RFCs; this helps address issues with interactive program cursors
* [Bug] #413: (also #414, #420, #454) Be significantly smarter about polling
& timing behavior when running proxy commands, to avoid unnecessary
(often 100%!) CPU usage
/usr/lib/python3.11/site-packages/paramiko /usr/lib/python3.11/site-packages/paramiko-3.4.0-py3.11.egg-info /usr/lib/python3.11/site-packages/paramiko-3.4.0-py3.11.egg-info/PKG-INFO /usr/lib/python3.11/site-packages/paramiko-3.4.0-py3.11.egg-info/SOURCES.txt /usr/lib/python3.11/site-packages/paramiko-3.4.0-py3.11.egg-info/dependency_links.txt /usr/lib/python3.11/site-packages/paramiko-3.4.0-py3.11.egg-info/requires.txt /usr/lib/python3.11/site-packages/paramiko-3.4.0-py3.11.egg-info/top_level.txt /usr/lib/python3.11/site-packages/paramiko/__init__.py /usr/lib/python3.11/site-packages/paramiko/__pycache__ /usr/lib/python3.11/site-packages/paramiko/__pycache__/__init__.cpython-311.opt-1.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/__init__.cpython-311.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/_version.cpython-311.opt-1.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/_version.cpython-311.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/_winapi.cpython-311.opt-1.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/_winapi.cpython-311.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/agent.cpython-311.opt-1.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/agent.cpython-311.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/auth_handler.cpython-311.opt-1.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/auth_handler.cpython-311.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/auth_strategy.cpython-311.opt-1.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/auth_strategy.cpython-311.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/ber.cpython-311.opt-1.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/ber.cpython-311.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/buffered_pipe.cpython-311.opt-1.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/buffered_pipe.cpython-311.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/channel.cpython-311.opt-1.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/channel.cpython-311.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/client.cpython-311.opt-1.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/client.cpython-311.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/common.cpython-311.opt-1.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/common.cpython-311.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/compress.cpython-311.opt-1.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/compress.cpython-311.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/config.cpython-311.opt-1.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/config.cpython-311.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/dsskey.cpython-311.opt-1.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/dsskey.cpython-311.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/ecdsakey.cpython-311.opt-1.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/ecdsakey.cpython-311.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/ed25519key.cpython-311.opt-1.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/ed25519key.cpython-311.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/file.cpython-311.opt-1.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/file.cpython-311.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/hostkeys.cpython-311.opt-1.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/hostkeys.cpython-311.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/kex_curve25519.cpython-311.opt-1.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/kex_curve25519.cpython-311.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/kex_ecdh_nist.cpython-311.opt-1.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/kex_ecdh_nist.cpython-311.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/kex_gex.cpython-311.opt-1.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/kex_gex.cpython-311.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/kex_group1.cpython-311.opt-1.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/kex_group1.cpython-311.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/kex_group14.cpython-311.opt-1.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/kex_group14.cpython-311.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/kex_group16.cpython-311.opt-1.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/kex_group16.cpython-311.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/kex_gss.cpython-311.opt-1.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/kex_gss.cpython-311.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/message.cpython-311.opt-1.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/message.cpython-311.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/packet.cpython-311.opt-1.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/packet.cpython-311.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/pipe.cpython-311.opt-1.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/pipe.cpython-311.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/pkey.cpython-311.opt-1.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/pkey.cpython-311.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/primes.cpython-311.opt-1.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/primes.cpython-311.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/proxy.cpython-311.opt-1.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/proxy.cpython-311.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/rsakey.cpython-311.opt-1.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/rsakey.cpython-311.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/server.cpython-311.opt-1.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/server.cpython-311.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/sftp.cpython-311.opt-1.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/sftp.cpython-311.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/sftp_attr.cpython-311.opt-1.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/sftp_attr.cpython-311.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/sftp_client.cpython-311.opt-1.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/sftp_client.cpython-311.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/sftp_file.cpython-311.opt-1.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/sftp_file.cpython-311.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/sftp_handle.cpython-311.opt-1.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/sftp_handle.cpython-311.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/sftp_server.cpython-311.opt-1.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/sftp_server.cpython-311.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/sftp_si.cpython-311.opt-1.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/sftp_si.cpython-311.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/ssh_exception.cpython-311.opt-1.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/ssh_exception.cpython-311.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/ssh_gss.cpython-311.opt-1.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/ssh_gss.cpython-311.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/transport.cpython-311.opt-1.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/transport.cpython-311.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/util.cpython-311.opt-1.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/util.cpython-311.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/win_openssh.cpython-311.opt-1.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/win_openssh.cpython-311.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/win_pageant.cpython-311.opt-1.pyc /usr/lib/python3.11/site-packages/paramiko/__pycache__/win_pageant.cpython-311.pyc /usr/lib/python3.11/site-packages/paramiko/_version.py /usr/lib/python3.11/site-packages/paramiko/_winapi.py /usr/lib/python3.11/site-packages/paramiko/agent.py /usr/lib/python3.11/site-packages/paramiko/auth_handler.py /usr/lib/python3.11/site-packages/paramiko/auth_strategy.py /usr/lib/python3.11/site-packages/paramiko/ber.py /usr/lib/python3.11/site-packages/paramiko/buffered_pipe.py /usr/lib/python3.11/site-packages/paramiko/channel.py /usr/lib/python3.11/site-packages/paramiko/client.py /usr/lib/python3.11/site-packages/paramiko/common.py /usr/lib/python3.11/site-packages/paramiko/compress.py /usr/lib/python3.11/site-packages/paramiko/config.py /usr/lib/python3.11/site-packages/paramiko/dsskey.py /usr/lib/python3.11/site-packages/paramiko/ecdsakey.py /usr/lib/python3.11/site-packages/paramiko/ed25519key.py /usr/lib/python3.11/site-packages/paramiko/file.py /usr/lib/python3.11/site-packages/paramiko/hostkeys.py /usr/lib/python3.11/site-packages/paramiko/kex_curve25519.py /usr/lib/python3.11/site-packages/paramiko/kex_ecdh_nist.py /usr/lib/python3.11/site-packages/paramiko/kex_gex.py /usr/lib/python3.11/site-packages/paramiko/kex_group1.py /usr/lib/python3.11/site-packages/paramiko/kex_group14.py /usr/lib/python3.11/site-packages/paramiko/kex_group16.py /usr/lib/python3.11/site-packages/paramiko/kex_gss.py /usr/lib/python3.11/site-packages/paramiko/message.py /usr/lib/python3.11/site-packages/paramiko/packet.py /usr/lib/python3.11/site-packages/paramiko/pipe.py /usr/lib/python3.11/site-packages/paramiko/pkey.py /usr/lib/python3.11/site-packages/paramiko/primes.py /usr/lib/python3.11/site-packages/paramiko/proxy.py /usr/lib/python3.11/site-packages/paramiko/rsakey.py /usr/lib/python3.11/site-packages/paramiko/server.py /usr/lib/python3.11/site-packages/paramiko/sftp.py /usr/lib/python3.11/site-packages/paramiko/sftp_attr.py /usr/lib/python3.11/site-packages/paramiko/sftp_client.py /usr/lib/python3.11/site-packages/paramiko/sftp_file.py /usr/lib/python3.11/site-packages/paramiko/sftp_handle.py /usr/lib/python3.11/site-packages/paramiko/sftp_server.py /usr/lib/python3.11/site-packages/paramiko/sftp_si.py /usr/lib/python3.11/site-packages/paramiko/ssh_exception.py /usr/lib/python3.11/site-packages/paramiko/ssh_gss.py /usr/lib/python3.11/site-packages/paramiko/transport.py /usr/lib/python3.11/site-packages/paramiko/util.py /usr/lib/python3.11/site-packages/paramiko/win_openssh.py /usr/lib/python3.11/site-packages/paramiko/win_pageant.py /usr/share/doc/packages/python311-paramiko /usr/share/doc/packages/python311-paramiko/README.rst /usr/share/licenses/python311-paramiko /usr/share/licenses/python311-paramiko/LICENSE
Generated by rpm2html 1.8.1
Fabrice Bellet, Fri Apr 26 23:30:45 2024